where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

687 views
Technical Discussions
106ANG
106ANG
05:30 May-29-2001
Welding simbols (+)

Good 24h!
May be off, but I can't find the standard on welding simbols.
Pls, point out the web-page dealing with this question.
Interesting EN 25817 or DS 412

BR
106ANG


    
 
 Reply 
 
Udo Schlengermann
Consultant, -
Standards Consulting, Germany, Joined Nov 1998, 177

Udo Schlengermann

Consultant, -
Standards Consulting,
Germany,
Joined Nov 1998
177
06:10 May-29-2001
Re: Welding simbols (+)
Reply by Udo Schlengermann:

Look at
EN 12345 (Multilingual terms for welded joints with illustrations)
EN 22553 ( Welded, brazed and soldered joints - Symbols)

Kind regards
Udo Schlengermann
+++
: Good 24h!
: May be off, but I can't find the standard on welding simbols.
: Pls, point out the web-page dealing with this question.
: Interesting EN 25817 or DS 412
.
: BR
: 106ANG
.



    
 
 Reply 
 
106ANG
106ANG
08:39 May-31-2001
Thanks. (-)
.


    
 
 Reply 
 

Product Spotlight

Research and Applications Development For NDT

The Research and Applications Development (RAD) group is a newly formed team within Acuren dedicat
...
ed to tackling challenging inspection problems. Our focus is the development of novel, field deployable, advanced inspection techniques for use in cases where standard NDT methods are ineffective. We don't wait for new innovations, we engineer them. From concept to commissioning.
>

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window