where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Volume Graphics GmbH
By choosing Volume Graphics software, you can rely on more than 20 years of experience in the development of software for non-destructive testi ...
350 views
Job Offers
Mohd Al-Othman
Mohd Al-Othman
10:38 Mar-31-2009
NDT Technician / Engineers

Posted by Al-Othman Co.
Job Location: Saudi Arabia

We have 2 vacancies to fill immeediately our in NDT Dept. The incumbent candidates should have the follwoing qualifications and possibly have worked between 5 - 7 years in similar capacities as Sales Engineer.

- Engineering Degree or
- Diploma in Engineering
- ASNT/PCN Level III / Level II Ultrasonics
- AUTO UT / TOFD
- Phased Array
- Should be able performation demonstration of equipment (basic training would provided by factory).
- Past experience with Olympus NDT equipment would be preferable.

Salary would be according to qualification and experience. All other fringe benefits would be according to the company rules.

W/Regards,

Mohammed A. Al-Othman
President / CEO
Al-Othman Co. | Al-Rayan Bldg. | King Khaled St. | PO Box 1783 | Dammam 31441 | Saudi Arabia
Tel: (966) 3 8331197 / 8343494 | Fax: (966) 3 8330619 | Email: alothman@anet.net.sa

 
 

Product Spotlight

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Semi-Automated Phased Array Immersion System for Small Composite Parts

Turn-key semi-automated system as an improved and affordable solution for inspection of small comp
...
osite parts. Includes support table, immersion tank, scanner, PA instrument, PC, Analysis software, database, wedge management and other options.
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window