|
 893 views |
 Technical Discussions | | hassan
 | hassan
|  12:52 Apr-10-2009
RT HI
Iwould ask you regarding a survey meter RDS-110.
I want to know how to cheak the better levelfor it?
Thanks,
Hassan
RSO | |
| | | | hassan
| hassan
| 12:54 Apr-10-2009
Re: RT In Reply to hassan at 12:52 Apr-10-2009 (Opening).
I mean the betrey level for the survey meter?
thanks,
Hassan\RSO | |
| | | |  Nigel Armstrong
Engineering, - Specialist services
United Kingdom, Joined Oct 2000,  1096 | | 16:38 Apr-10-2009
Re: RT In Reply to hassan at 12:54 Apr-10-2009 .
Hassan,
Some battery checks are accomplished by pushing 2 buttons simultaneously or some other subtle subterfuge. Battery strength is indicated by how far the pointer surges across the screen from its restt position.
Can a question be any more superficiial than that, short of how do I switch on/off my machine!!! | |
| | | | Phil
NDT Inspector, Radiation Safety
BINDT, MIAQP, United Kingdom, Joined Mar 2009, 151 |
Phil
NDT Inspector, Radiation Safety
BINDT, MIAQP,
United Kingdom,
Joined Mar 2009
151
| 13:35 Apr-13-2009
Re: RT In Reply to hassan at 12:54 Apr-10-2009 .
Hassan,
To check the battery level on the RDS-110 Survey Meter you press and hold down the Scale Illumination button for approx 5 seconds, until you hear a fast intermittent beep. If after you release the button you see a colon (:) in the center of the display, replace the batteries.
If I remember correctly this is described on the back of the Survey Meter.
Phil | |
| | | | Good Grief
| Good Grief
| 20:58 Apr-13-2009
Re: RT In Reply to Phil at 13:35 Apr-13-2009 .
http://www.laurussystems.com/Service/RDS110%20Survey%20Meter%20User%20Manual.pdf
Result of typing in Google "RDS-110" | |
| | | | Phil
NDT Inspector, Radiation Safety
BINDT, MIAQP, United Kingdom, Joined Mar 2009, 151 |
Phil
NDT Inspector, Radiation Safety
BINDT, MIAQP,
United Kingdom,
Joined Mar 2009
151
| 10:44 Apr-14-2009
Re: RT In Reply to Good Grief at 20:58 Apr-13-2009 .
Good Grief I just typed into yahoo search RDS-110 Survey Meter you get a pdf copy of the user manual. | |
| | |  EKOSCAN Phased ArrayIn order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent ... ional or Phased Array.
As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc.
Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc.
Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection. >  I&T NardoniNDT, RESEARCH AND DEVELOPMENT OF NEW METHODOLOGY, TRAINING CENTER
I&T NARDON INSTITUTE was idiated ... in 1988 by Giuseppe Nardoni, now
president and owner of the company, based on his multi-annual and
international experience in the field of NDT. >  FMC/TFMNext generation for Phased Array UT is here now with FMC/TFM! Have higher
resolution imaging, impr ... oved signal to noise ratio, characterize, size and analyze
defects better with access to several wave mode views and save raw FMC data for
higher quality analysis. Some of the benefits are:
- Beautiful Image! Easier to understand what you're looking at
- Completely focused in entire image or volume
- Much easier to define setups before inspection
- Easier to decipher geometry echoes from real defects
- Oriented defects (e.g. cracks) are imaged better
- See image from different wave modes from one FMC inspection
- FMC data can be reprocessed/analyzed without going back to the field
> |
|
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
|
|
