where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1507 views
Technical Discussions
Gowri santhosh palika
NDT Inspector,
Royscan engineering pte ltd, Singapore, Joined May 2008, 51

Gowri santhosh palika

NDT Inspector,
Royscan engineering pte ltd,
Singapore,
Joined May 2008
51
18:05 Apr-11-2009
T K Y joints

hi

what are the main things i have to consider when i do the UT on T K Y weld joints mainly leg pipe to pipe.

    
 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 278

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
278
21:50 Apr-12-2009
Re: T K Y joints
In Reply to Gowri santhosh palika at 18:05 Apr-11-2009 (Opening).

What code or standard are you examining to and how is the accept/reject criteria established matched with understanding where the sound is actually going is a good place to start. API RP 2X has a good methodology to the examination of structural connections so I would study that. If you are new to this a well built mock up to practice on is essential.

    
 
 
R Duwe
NDT Inspector, API-510, 570, 653
MISTRAS, USA, Joined Jan 2009, 148

R Duwe

NDT Inspector, API-510, 570, 653
MISTRAS,
USA,
Joined Jan 2009
148
04:31 Apr-13-2009
Re: T K Y joints
In Reply to John O'Brien at 21:50 Apr-12-2009 .

Another excellent source of criteria and UT guidance is AWS D1.1 Both D1.1 and RP 2X are available online from http://store.ihs.com

    
 
 
hendro harner
hendro harner
19:54 Aug-17-2011
Re: T K Y joints
In Reply to Gowri santhosh palika at 18:05 Apr-11-2009 (Opening).

to leg pipe to pipe only use class x to accepten criteria

    
 
 

Product Spotlight

TVC awarded UKAS accreditation

TVC are delighted to finally announce we have been awarded UKAS accreditation for our calibration
...
laboratory. Laboratory accreditation to ISO/IEC 17025:2005 enables us to conduct the Electrical Verification of Ultrasonic Flaw Detection Equipment to BS EN 12668-1:2010. It has taken many months of hard work and we want to thank our staff for all their efforts during this massive undertaking.
>

IK4-IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque technology centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system
...
for the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window
s