where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
816 views
Technical Discussions
elgazery
elgazery
07:13 Jun-13-2001
Flowmeters

Please,
I am looking to any information about the calibration of ultrasonic flowmeters.
Any bit of information will be respectable whatever how much help me.
Thanks in advance.


    
 
 Reply 
 
Marius Dinu
NDT Inspector, Pre-service and In-Service Inspections
General Electric - Life Extension Services, Romania, Joined Oct 1999, 5

Marius Dinu

NDT Inspector, Pre-service and In-Service Inspections
General Electric - Life Extension Services,
Romania,
Joined Oct 1999
5
07:27 Jun-13-2001
Re: Flowmeters
: Please,
: I am looking to any information about the calibration of ultrasonic flowmeters.
: Any bit of information will be respectable whatever how much help me.
: Thanks in advance.
.
What kind of of flowmeters are you talking about? Are they "clamp-on" or intrusive type?

At Cernavoda Nuclear Power Plant we are extensively using Controlotron Uniflow 990 Series Flowmeters. These flowmeters have an intrinsec calibration which, usually, ensure an accuracy better than 1% (enough for the majority of our applications).

However, if you want a better calibration, you have to go to a specialised facility. There is such a place in Romania, and I think that is also in Canada one (RPC - Research and Productivity Council). Try also to find more information from the manufacturer (Controlotron Corporation - they have the headquarter in New York; accessing www.controlotron.com could be a good ideea too).

Marius Iulian DINU
Inspections & NDE Supervisor
Cernavoda 1 N.P.P.
Romania


    
 
 Reply 
 
Alexander Mironenko
Sales,
INTRON PLUS Ltd., Russia, Joined Sep 2001, 17

Alexander Mironenko

Sales,
INTRON PLUS Ltd.,
Russia,
Joined Sep 2001
17
09:04 Sep-11-2001
Re: Flowmeters
: : Please,
: : I am looking to any information about the calibration of ultrasonic flowmeters.
: : Any bit of information will be respectable whatever how much help me.
: : Thanks in advance.
: .
: What kind of of flowmeters are you talking about? Are they "clamp-on" or intrusive type?
.
: At Cernavoda Nuclear Power Plant we are extensively using Controlotron Uniflow 990 Series Flowmeters. These flowmeters have an intrinsec calibration which, usually, ensure an accuracy better than 1% (enough for the majority of our applications).
.
: However, if you want a better calibration, you have to go to a specialised facility. There is such a place in Romania, and I think that is also in Canada one (RPC - Research and Productivity Council). Try also to find more information from the manufacturer (Controlotron Corporation - they have the headquarter in New York; accessing www.controlotron.com could be a good ideea too).
.
: Marius Iulian DINU
: Inspections & NDE Supervisor
:Cernavoda 1 N.P.P.
: Romania
.
:I recommend you to visit home page of Transonic Systems Inc. - leader flowmeter manufacturer and our sister company - www.transonic.com .



    
 
 Reply 
 

Product Spotlight

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

High-end Ultrasonic Flaw Detector with 32:128PR PAUT and 2-ch TOFD: SyncScan 2

SIUI’s newly launched SyncScan 2, is a high-end ultrasonic flaw detector with 32:128PR PAUT and
...
2-ch TOFD, which can maximize your efficiency for PA and TOFD. ● Support PA/TOFD/UT ● 32-ch PA is more suitable for inspection on extra-thick wall and high-attenuation material. ● 32-ch PA and 2-ch TOFD work simultaneously. ● Support PR mode for corrosion inspection.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Magnetic X-Ray Pipeline Crawler

Zhong Yi brand pipeline crawler is magnetic/micro-video controlled crawler with DC X ray unit inst
...
alled for checking welding of pipeline. Move steadily inside the pipeline 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometers and provide the efficient inspection of the pipeline.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window