where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
224 views
Job Offers
F.D.LEO DAVID
F.D.LEO DAVID
10:14 May-12-2009
For Offshore in UAE

Job Location: UAE
offered by NDT SUPPLIES

MOST URGENT & IMMEDIATE REQUIREMENT

We are looking for the following manpower categories for our client in UAE for an offshore job.

1. Welding Inspectors with Diploma / Degree with more than 10 years experience in Onstream NDT and corrosion monitoring with offshore experience
2. Senior Inspectors Diploma / Degree with more than 10 years experience in Onstream NDT and corrosion monitoring with offshore experience
3. NDT Technicians Diploma / Degree with more than 8 years experience in Onstream NDT and corrosion monitoring with offshore experience

Note : Only Indians Preferred. And While sending the resume, Please clearly mention the offshore companies and platforms worked.

For further details, contact :

Mr.MARTIN PRABHU
NDT SUPPLIES
90/1, Yamuna street,
Chinmaya nagar,
Stage - 1,
Chennai - 600 111
PH : 044 42103390 / 26191788
Email : ndtmanpower@airtelmail.in

    
 
 

Product Spotlight

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window