where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Sonotron NDT
Original developer and manufacturer of advanced ultrasonic instruments
674 views
Technical Discussions
ViKKI
NDT Inspector, Blue Star Limited
IE , India, Joined May 2009, 29

ViKKI

NDT Inspector, Blue Star Limited
IE ,
India,
Joined May 2009
29
08:38 Jun-02-2009
RFET Standard Procedure

Hi,
I need an standard procedure for carrying out RFET on Air fin coolers tubes.

    
 
 Reply 
 
Saju
Saju
09:37 Jun-02-2009
Re: RFET Standard Procedure
In Reply to ViKKI at 08:38 Jun-02-2009 (Opening).

Hi,

Refer 'ASTM E 2096- standard practice for insitu examination of Ferromagnetic heat exchanger tubes using remote field testing'.The fins might be a problem for effective inspection using RFT.

    
 
 Reply 
 
Danang
Danang
06:57 Sep-07-2009
Re: RFET Standard Procedure
In Reply to Saju at 09:37 Jun-02-2009 .

Hi,
Use Magnetic Flux Leakage Inspection Procedure as a solution

    
 
 Reply 
 

Product Spotlight

Lyft™: Pulsed Eddy Current Reinvented

PEC Reinvented—CUI Programs Redefined Corrosion under insulation (CUI) is possibly the greatest u
...
nresolved asset integrity problem in the industry. Current methods for measuring wall thickness with liftoff, without removing insulation, all have severe limitations. Eddyfi introduces Lyft — a reinvented, high-performance pulsed eddy current (PEC) solution. The patent- pending system features a state-of-the-art portable instrument, real- time C-scan imaging, fast data acquisition with grid-mapping and dynamic scanning modes, and flexibility with long cables. It can also scan through thick metal and insulation, as well as aluminum, stainless steel, and galvanized steel weather jackets. Who else but Eddyfi to reinvent an eddy current technique and redefine CUI programs. Got Lyft?
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

NEW Wheel Type Phased Array Probe

DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
...
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window