where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

DASEL SISTEMAS
Our Phased Array equipments, based on SITAU Technology, are among the PAS highest performance in the market.
741 views
Technical Discussions
P. Palanichamy
R & D, SCIENTIFIC OFFICER
INDIRA GANDHI CENTRE FOR ATOMIC RESEACH, India, Joined Jul 2000, 10

P. Palanichamy

R & D, SCIENTIFIC OFFICER
INDIRA GANDHI CENTRE FOR ATOMIC RESEACH,
India,
Joined Jul 2000
10
02:32 Jun-22-2001
Mechanical property correlation

Dear Forum Members,

We have made an interesting study using ultrasonic velocity measurements in Alloy 625 (Inconol) wherein found a good linear correlation between ultrasonic velocity and yield strength. We have generated different yield strength specimens by ageing in the temperature range 923 to 1123K. We would like to receive the supportive physical explanation or references for this linear variation between yield strength and ultrasonic velocity.

Thank you in advance.

P. Palanichamy
--------------


 
 Reply 
 
Macelo Pinheiro Mendes
Student
Rio de Janeiro Federal University, Brazil, Joined Feb 2001, 3

Macelo Pinheiro Mendes

Student
Rio de Janeiro Federal University,
Brazil,
Joined Feb 2001
3
00:57 Jun-23-2001
Re: Mechanical property correlation
Dear P. Palachamy,

It seems to be a foolish answer but the yeld strength
is intimately related to the Young modulus which in
turn is related to the ultrasonic velocity. Regards

Macelo Pinheiro Mendes

: Dear Forum Members,
.
: We have made an interesting study using ultrasonic
velocity measurements in Alloy 625 (Inconol) wherein
found a good linear correlation between ultrasonic
velocity and yield strength. We have generated
different yield strength specimens by ageing in
the temperature range 923 to 1123K. We would
like to receive the supportive physical explanation
or references for this linear variation between
yield strength and ultrasonic velocity.
.
: Thank you in advance.
.
: P. Palanichamy
: --------------
.



 
 Reply 
 
Gordon E. Smith
Consultant
H.C.Nutting, Co., USA, Joined Nov 1998, 6

Gordon E. Smith

Consultant
H.C.Nutting, Co.,
USA,
Joined Nov 1998
6
07:03 Jun-25-2001
Re: Mechanical property correlation
Depending on what happened during aging..

You could be seeing Vl changes due to differing INCO 625 alloy grain sizes or a variation on segregation of the alloying elements..

Hint look for Mo segration..




 
 Reply 
 

Product Spotlight

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

XRHRobotStar

In high volume industries like automotive the requirement for a hundred percent X-ray inspection c
...
reates a bottleneck in the production. The XRHRobotStar is a fully Automated Defect Recognition (ADR) capable robot-system that allows an ultra-fast in-line inspection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window