The Largest Open Access Portal of Nondestructive Testing (NDT)

601 views Technical Discussions Sam Sam 18:38 Jul-03-2009 Coating damage assessment of buried pipeline Any sugggestions to assess the extend of exteranl coating damage or external corrosion on a burried pipeline (let us say for 24"line). We are not concerned about any internal corrosion. Thanks Sam    Reply  Translate  Close   Creed NDT Inspector, Vietnam, Joined Jul 2009, 37 Creed NDT Inspector, Vietnam, Joined Jul 2009 37 06:43 Jul-08-2009 Re: Coating damage assessment of buried pipeline In Reply to Sam at 18:38 Jul-03-2009 (Opening). Why dont you try DCVG to inspect the external coating for burried pipeline?    Reply  Translate  Close   Ahmad Sawalha Ahmad Sawalha 18:16 Jul-15-2009 Re: Coating damage assessment of buried pipeline In Reply to Creed at 06:43 Jul-08-2009 . Dear sam, you can try guided wave or corrosion scan, but first you need to do an economical study for cause this technology is very expensive regards ahmad sawalha inspection engineer JBC    Reply  Translate  Close

Product Spotlight Eddy Current inspection : RotoETscan Rotating Head StandControle Mesure Systemes The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a ... t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets). > 2 Showcases5 Videos GEKKO - Portable Phased Array Testing with TFM in Real-Time StandKARL DEUTSCH The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi ... ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels. > 4 Showcases5 Videos Immersion systems StandScanMaster Systems (IRT) Ltd. ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a ... n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions. > 5 Showcases5 Videos TESTD-PT SYSTEM StandTelops Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil ... ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials. > 2 Showcases more Showcases

Share...

• Home
• Exhibition
• Archive
• Forum
• Jobs
• Members
• Events
• Directory
• NDT A-Z

• Advertise
• Privacy Policy
• Contact & Imprint
• About

© NDT.net - Where expertise comes together. The Largest Open Access Portal of Nondestructive Testing (NDT)- since 1996