where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

813 views
Career Discussions
Rashid Sultan
Sales
Pakistan, Joined Jan 2002, 15

Rashid Sultan

Sales
Pakistan,
Joined Jan 2002
15
16:05 Jul-08-2009
PLS recomend who can manufacture ET probes

We need ET surface probes for shaft inspection using Eddy Current testing
technique.
These surface probes should accompany a fixture to handle the
shafts of 1162mm and 3547mm in length.
The materials of the shafts are ferromagnetic low-alloy steel and
ferromagnetic alloy steel (Cr 13%, Ni 3.5%, Mo 0.54%).
The diameters of the shafts are as follows:
1) ET probe for dia 195mm to 198mm
2) ET probe for dia 225mm to 230mm .
3) ET probe for dia 243mm
4) ET probe for dia 320mm
5) Shielded Pencil Probe
Your kind cooperation is required in this regard

    
 
 
Mike Bentley
Mike Bentley
13:05 Jul-24-2009
Re: PLS recomend who can manufacture ET probes
In Reply to Rashid Sultan at 16:05 Jul-08-2009 (Opening).

Dear Mr Sultan

I saw your request for probe manufacture and can comfirm that we can help.
Our company and our technology has references and delivered to defence,
rail,petrochem and power for such applications.
Please look on our website www.lizard.co.uk for further information or contact me directly on my email (mnb@lizard.co.uk) and we would be delighted to help you with your request..

Best regards
Mike Bentley CEO

    
 
 
Rick Cahill
Engineering,
GE Inspection Technologies, USA, Joined Dec 2008, 40

Rick Cahill

Engineering,
GE Inspection Technologies,
USA,
Joined Dec 2008
40
15:34 Aug-11-2009
Re: PLS recomend who can manufacture ET probes
In Reply to Rashid Sultan at 16:05 Jul-08-2009 (Opening).

GE Sensing & Inspection Technologies is a manufacturer of eddy current coils and custom fixtures. To discuss your application, please contact jeff.draper@ge.com.

    
 
 

Product Spotlight

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window