where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

272 views
Job Seeks
S.R.G.PRABHU
S.R.G.PRABHU
19:37 Jul-08-2009
CSWIP Certified AUT inspector/ASNT LEVEL III/SCWI/OMNISCAN Phased array trained senior Inspector

Job Location: Worldwide

Hello ,

I am S.R.G.PRABHU, an Indian National worked in Europe, Asia,Middle east, and West/North Africa.

I have completed my work in offshore Abudhabi for NPCC for the client GASCO , as AUT AUDITOR to verify the contractor AUT syaytem and operators performance onboard NPCC barge.The work will finish by 20 June 2009.Previously I was working in Angola offshore as TOTAL CLIENT AUT SPECIALIST for their offshore pipe lay project . I did a project in Persian Gulf for a pipe lay job for STATOIL HYDRO -NORWAY as client AUT inspector FROM Dec 07 to Feb 01, 2009. Previously I was working for ENI GAS in an offshore platform in Libya as Inspection supervisor. I completed my contract with QATARGAS II, offshore Qatar for 42 inch condensate project since April 07 TO Oct 07 as client LEAD inspector( AUT SURVEYOR). Last year I was in an offshore pipe lay project in Persian gulf for Statoil -Norway as Client AUT surveyor in a Pipe lay barge. Previously I worked in Sakhalin island for RGS-Russian German consortium which was the sole inspection authority for Sakhalin II phase II projects. I was a third party AUT inspector onboard SEMAC-I, overseeing Saipem techs every day work from July1005 to Nov2005.

From 2003 June to 2004 March, I was a SHELLDEEPWATER NIGERIA (SNEPCO) a division of DEEPWATER SHELL-HOUSTON client AUT/ SENIOR WELDING inspector for their deepwater pipe lay project, 'Bonga' in Nigeria and Paris-France. From 2001 to 2003 I was a Exxon Mobil Nigeria client inspector offshore.

I have worked in France, Nigeria, Oman, Qatar, Angola,Abhudhabi, Saudi, China and India and also Persian gulf. My experience includes Refineries, Petrochemical, Desalinations, Pipelines on and offshore, offshore structures including risers and deepwater J-lay. I am flexible, team man and constantly learning to improve my quality of work.

I am CSWIP AUT PHASED ARRAY DATA INTERPRETER(PIPEWIZARD) (as per EN 473) from TWI north- Middles borough, ASNT LEVEL III in RT and UT, Senior welding inspector from AWS, and OLUMPUS OMNISCAN PHASED ARRY MANUAL UT trained and certified as Level II with my offshore survival(BOSIET-OPITO CERTIFIED), and H2S both valid currently and till April 2012.

I am looking forward hearing from you soon.



Regards

--

S.R.G.Prabhu M.Sc,

ASNT LEVEL III -RT,UT.

CSWIP-AUT PHASED ARRAY DATA INTERPRETER LEVEL II

SCWI-AWS

OLYMPUS OMNISCAN MANUAL PHASED ARRY LEVEL II

Telephone:0091 44 249 80795 /
91960081598 & 00919840535959 Mobiles

No-3, Second street, Maris avenue, Collector's office road,

Cantonment, Trichy-620001

Tamilnadu state India

 
 

Product Spotlight

Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection

This set of two blocks has been specially designed for situations where ultrasonic examination tak
...
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window