where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
302 views
Job Seeks
Mohamed Farouk
Teacher, NDT & welding Instructor & Lecture
Egyptian Welding Academy, Egypt, Joined Nov 2007, 4

Mohamed Farouk

Teacher, NDT & welding Instructor & Lecture
Egyptian Welding Academy,
Egypt,
Joined Nov 2007
4
23:21 Jul-08-2009
Welding inspector

Job Location: Middle East

I'm Instructor/ Trainer at Egyptian Welding Academy, have International Welding Engineer (IWE) diploma (United European certificate, EUROPEAN FEDERATION FOR WELDING, JOINING AND CUTTING authorization - EWF-Passport) and metallurgy engineering degree ( 5 years degree), and have NDT method Levels II (UT, RT, PT, MT).

I have experience at NDT and Welding as Instructor/ Lecture since Apr. 1, 2009 until now, Welding Electrode/ Flux Fabrication Specialist (from 4/2008 until Apr. 1, 2009), and NDT 13 months before Apr. 2008, with total experience 17 years.

Looking for a challenging career opportunity in a reputable multinational organization at an Arabian country to work as NDT and Welding Instructor/ Lecture, or Fitness-for-Service Eng., or Risk-Based Assessment Eng. or Welding Inspector.

Best regards,
Mohamed Farouk
Mob: 002 0119112833
002 0122728570
Moh_farouq@yahoo.com

 
 

Product Spotlight

Echomac® PA Bar Tester

The Echomac® PA BT provides 100% inspection of round bars for core and surface defects, at speeds u
...
p to 2 m/sec, depending on the specific application. The unit allows producers to handle a much larger range of diameters in one installation, and is available in 3 models to test 10 – 75mm diameter (small model); 20 – 130mm (medium model) or 50 – 254mm (large model) bars.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window