where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

904 views
Technical Discussions
Richard D. Roberts
Engineering, Executive Managment
Quest Integrity Group, USA, Joined Nov 1998, 78

Richard D. Roberts

Engineering, Executive Managment
Quest Integrity Group,
USA,
Joined Nov 1998
78
09:34 Jun-26-2001
Centering / Stand Off Brushes for Eddy Current Probes


I am looking for a supplier of Centering / Stand Off Brushes for Eddy Current Probes. Any assistance in this matter would be greatly appreciated.

Regards,
Rich Roberts



 
 Reply 
 
Ingo Becker
Engineering, NDT Inspector & Sales
ec-works GmbH, Germany, Joined Apr 2000, 31

Ingo Becker

Engineering, NDT Inspector & Sales
ec-works GmbH,
Germany,
Joined Apr 2000
31
08:51 Jun-27-2001
Re: Centering / Stand Off Brushes for Eddy Current Probes
Hello Richard,

DeltaTest produces (and sells!) many types of eddy current probes and all acessories including centering systems. Please take a look at our homepage http://www.deltatest.de and
send an e-mail with your specification.

Best regards

Ingo Becker


: I am looking for a supplier of Centering / Stand Off Brushes for Eddy Current Probes. Any assistance in this matter would be greatly appreciated.
.
: Regards,
: Rich Roberts
.



 
 Reply 
 
Crystal Sheppa
Crystal Sheppa
01:54 Jul-06-2001
Re: Centering / Stand Off Brushes for Eddy Current Probes
:
: I am looking for a supplier of Centering / Stand Off Brushes for Eddy Current Probes. Any assistance in this matter would be greatly appreciated.
.
: Regards,
: Rich Roberts
.
Zetec, Inc is a world-wide manufacturer of eddy current probes, instruments, and accessories. If you could please send more information about your application, I would like to try to help you. You can also look at our homepage at www.zetec.com.

Thank you!



 
 Reply 
 

Product Spotlight

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

On Demand Webinar: Improve the Efficiency and Accuracy of Inspection Scanning

On-demand webinar on scanning technology that helps improve the efficiency and accuracy of ultrasoni
...
c inspections in oil and gas, aerospace, manufacturing and other industrial applications. The webinar features a scanning solution for multiple inspection environments, including flat and curved specimens, magnetic and nonmagnetic surfaces and raster scanning over long distances. View it today.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window