where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

402 views
Job Offers
Patil
Consultant, - Manager
Patil NDT Institute, India, Joined Feb 2009, 8

Patil

Consultant, - Manager
Patil NDT Institute,
India,
Joined Feb 2009
8
13:08 Jul-26-2009
Corrosion Engineers

Posted by NDT Consultants
Job Location: Kuwait

We are looking for our client of Kuwait
Corrosion Engineers on a 2 year contract who have a minimum Bachelor of Engineering ( Mechanical / Metallurgy) degree with at least 8 years experience in a refinery / petroleum / petro chemical industry. The ideal candidate should have a minimum of 4 years experience of working in a refinery with On stream / off stream plant inspection experience (Plant equipments are Tank, vessel, tower, exchangers, pipelines etc.) He should be familiar with all international standards and codes. Any exposure to RBI methodology and/or Fitness for Service will be considered as an absolute advantage.

 
 

Product Spotlight

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

32:128PR PAUT & 2-ch TOFD Flaw Detector: SyncScan 2

●32:128PR PAUT with optional 2-ch TOFD to maximize your efficiency ●Support PR mode for corrosi
...
on inspection ●Multiple solutions for welds & corrosion ●Faster scan speed (Approximately 3 meters/minute) ●Light weight: 4kg only including battery
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window