where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
3321 views
Technical Discussions
aldo
Engineering
Italy, Joined Jan 2009, 39

aldo

Engineering
Italy,
Joined Jan 2009
39
06:34 Jul-31-2009
MPT on cast iron

Is possible to do the MPT on caston iron (magnetic particle testing)? I do this answer because was a question on II level quiz....
I answered that do not possible to do MPT because caston iron is not ferromagnetic material...but correct answer saied that was possible......
I hope your suggestion....
Tanks and best regards...
Aldo

 
 Reply 
 
anjafo
NDT Inspector
Norway, Joined Aug 2009, 204

anjafo

NDT Inspector
Norway,
Joined Aug 2009
204
23:17 Aug-12-2009
Re: MPT on cast iron
In Reply to aldo at 06:34 Jul-31-2009 (Opening).

cast iron is ferromagnetic

stainless steels are not for example

 
 Reply 
 
S.Palanivelu
Engineering, - Steel Valve foundry
India, Joined Mar 2009, 2

S.Palanivelu

Engineering, - Steel Valve foundry
India,
Joined Mar 2009
2
19:52 Oct-22-2009
Re: MPT on cast iron
In Reply to anjafo at 23:17 Aug-12-2009 .

U can do MT testing on Cast iron.. it is ferromaganet material..

 
 Reply 
 
Jim Draper
Consultant, ASNT Level III MT PT RT VT
Draper NDT, USA, Joined Jul 2009, 99

Jim Draper

Consultant, ASNT Level III MT PT RT VT
Draper NDT,
USA,
Joined Jul 2009
99
16:10 Oct-23-2009
Re: MPT on cast iron
In Reply to S.Palanivelu at 19:52 Oct-22-2009 .

Cast iron is ferromagnetic, and some stainless steels are also. The three elements that are ferromagnetic are iron, nickel and cobalt.

 
 Reply 
 
chen zhiqiang
Teacher, - - engineering for
HEBEI UNIVERSITY COLLEGE OF Qlty.&Tech., China, Joined Oct 2009, 5

chen zhiqiang

Teacher, - - engineering for
HEBEI UNIVERSITY COLLEGE OF Qlty.&Tech.,
China,
Joined Oct 2009
5
01:27 Oct-26-2009
Re: MPT on cast iron
In Reply to Jim Draper at 16:10 Oct-23-2009 .

yes ,cast iron is ferromagnetic material and suit for PMI,and ferromagnetic material including iron,nikle,cobalt and relative self alloyed(such as carbon steel,alloyed str.steel etc.) not suitble for nonferrous( such as Al.copper,austain stainless steel).

 
 Reply 
 
Azhar Jamil
NDT Engineer
Panama, Joined May 2006, 17

Azhar Jamil

NDT Engineer
Panama,
Joined May 2006
17
06:55 Oct-26-2009
Re: MPT on cast iron
In Reply to chen zhiqiang at 01:27 Oct-26-2009 .

We can do the MPI of cast iron. If you are not sure about any material that is ferromagnetic or not, just check with a small magnet (or with yoke) prior to inspection .
regards

 
 Reply 
 

Product Spotlight

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window