where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1869 views
Career Discussions
Hergen Eilers
Hergen Eilers
03:07 Aug-07-2009
Commercial vendor for lead metaniobate transducer

Does anyone know where to purchase lead metaniobate transducer?

Thanks.

 
 Reply 
 
John Brunk
Engineering, NDT Level III
Self employed, part-time, USA, Joined Oct 1999, 162

John Brunk

Engineering, NDT Level III
Self employed, part-time,
USA,
Joined Oct 1999
162
13:19 Aug-07-2009
Re: Commercial vendor for lead metaniobate transducer
In Reply to Hergen Eilers at 03:07 Aug-07-2009 (Opening).

Most of the lead metaniobate transducers I have bought over the years have come from Ultran in Pennsylvania. The telephone number is 814 861 2001.

 
 Reply 
 
Rick Cahill
Engineering,
Waygate Technologies, USA, Joined Dec 2008, 40

Rick Cahill

Engineering,
Waygate Technologies,
USA,
Joined Dec 2008
40
13:27 Aug-10-2009
Re: Commercial vendor for lead metaniobate transducer
In Reply to Hergen Eilers at 03:07 Aug-07-2009 (Opening).

GE Sensing and Inspection Technologies manufactures transducers with Lead Metaniobate (LM) ceramic. Before you buy you'll need to know what size, frequency, and bandwidth you need for your application. There's no way to tell which probe models have LM in them other than to ask the manufacturer. If you are looking for sources of raw LM ceramic, I know of three; Keramos, Piezokinetics, and Del Piezo.

 
 Reply 
 
Christoph Schnitger
Christoph Schnitger
14:24 Aug-10-2009
Re: Commercial vendor for lead metaniobate transducer
In Reply to Hergen Eilers at 03:07 Aug-07-2009 (Opening).

Please be so kind to give a friend of mine, Mr. Justin Ji from the company CN Doppler
a mail. CN Doppler is one of the biggest manufacturer in the world for design / manufacturing
UT probes ( different styles , Phased array ) etc...

His mail adress : Xr.ji@cndoppler.cn or visit the webpage : www.cndoppler.cn

 
 Reply 
 
Justin
Engineering, Chief Engineer
Doppler Electronic Technologies Co., Ltd, China, Joined Sep 2009, 4

Justin

Engineering, Chief Engineer
Doppler Electronic Technologies Co., Ltd,
China,
Joined Sep 2009
4
09:01 Aug-28-2009
Re: Commercial vendor for lead metaniobate transducer
In Reply to Hergen Eilers at 03:07 Aug-07-2009 (Opening).

Thanks Christoph's recommendation.
Lead metaniobate is a special material for transducer. It's low mechanical QM, negligible aging, wide range of operating temperatures and small values for lateral and planar coupling compared to longitudinal coupling.
As used for transducer, it's good for single element thickness gauge probe.
We do have this material and some type of our probe use this material, such as our TS5P14T.
(5MHz, 14mm diameter, normal beam, hard protective face, dead area just is 2mm.)

 
 Reply 
 

Product Spotlight

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window