i repeat the question
While constructing DAC we always get a profile ie. metal travel distance to amplitude as a non linear curve. Less metal travel distance gives more equivalent amplitude. Now i got a doubt, in some occations we come across this curve as beam profile diagram apperas like gaussian beam.
can we use such DAC'S? some times i found it while working with TR Probes also.
another doubt is
if we give lead coating for about 3mm thick on aluminum sample of 15mm thick can we assess defects in lead/aluminum like debonds as well as cracks in these individual materials? can we check thickness of aluminum (if some reduction is expected during some more operations like buffing/grinding before lead coating)with this interface with access to aluminum only?
kindly ans these questions
Available to order from stock in a range of 5MHz – 7.5MHz and from
16 to 64 elements. Designed w
ith piezo-composite elements, Phoenix
phased array probes provide high-resolution imaging to maximise
sensitivity; accurate ultrasonic detection and sizing of defects
in welds; and effective corrosion mapping. Housed in a rugged
stainless steel case for on-site industrial NDT applications.