where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

519 views
Technical Discussions
Yosi Bar-Cohen
R & D,
Jet Propulsion Lab (JPL), USA, Joined Nov 1998, 26

Yosi Bar-Cohen

R & D,
Jet Propulsion Lab (JPL),
USA,
Joined Nov 1998
26
08:48 Jul-03-2001
SPIE's NDE Conference call for abstracts

Dear Colleague,


I am pleased to inform you of the SPIE's Smart NDE and Health Monitoring of
Structural and Biological Systems Conference (nde01). Abstracts for this
Conference are due on August 20, 2001 and information about it can be found
on http://spie.org/conferences/calls/02/ss/confs/nde01.html Some of the
interesting topics that are expected at this conference include papers on
NDE for medical and biological applications, robotics, smart structures,
MEMS, automation, microelectronics, criminology, geophysics, archeology and
others.

This SPIE's NDE01 Conference is part of the SPIE's 7th Annual International
Symposium on NDE for Health Monitoring and Diagnostics. This Symposium will
be held from March 17 to 21, 2002 at the Town & Country Resort & Convention
Center, San Diego, California USA. The symposium in co-located with the
SPIE's 9th Annual International Symposium on Smart Structures and Materials
and will give the attendees a great opportunity to participate in these
forums of related interdisciplinary technologies.


Sincerely
Yosi



 
 Reply 
 

Product Spotlight

Micro CT

nanoVoxel series has nano-scale resolution upto 500nm by using high voltage X-ray source (from 80-
...
300 kV) with micro/nano focal spot and highly sensitive flat panel detectors and unique Optical coupling detector.
>

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection

This set of two blocks has been specially designed for situations where ultrasonic examination tak
...
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window