where expertise comes together - since 1996

Web's Largest Portal of Nondestructive Testing (NDT)
Open Access Database (Conference Proceedings, Articles, News), Exhibition, Forum, Network

All Forum Boards
Technical Discussions >
High Temperature UT on KS Turbine Casing crack.
Career Discussions
Job Offers
Job Seeks
Classified Ads
About NDT.net
Articles & News

IMechE Engineering Training Solutions
World leading provider of Non-Destructive Testing and Corrosion Prevention and Coatings training, examinations and Level 3 Consultancy Services

1622 views
08:59 Jul-04-2001

Asim Niazi

NDT Inspector
Inspection Unit, Fauji Fertilizer Co.,
Pakistan,
Joined Jul 2001
6
High Temperature UT on KS Turbine Casing crack.

We have experienced cracks in our Synthesis machine steam inlet nozzles which are low alloy casting. We are monitoring the depth of the cracks by using Krautkramer Gmbh probes (W45B2GV & W60B2GV) only in the straight portion due to the constructional constraints of the probes. These probes were procured to acquire data on intricate and small radius surfaces at elevated temperature service. But installation of large dimension wedges (to avoid the exposure of probe crystal to high temperature) is restricting the utilization practically for straight surfaces only. Subsequently ends monitoring cannot be ensured due to the crack propagation in nozzle curvature at one side and variable thickness portion on other side.

Can anyone please advice us regarding any other high temperature miniature angle probe or alternate non-destructive technique, which can be used to monitor the cracks depth as well as the length.

ASIM NIAZI



 
05:42 Jul-05-2001
mic
NDT expert looking for employment Indian national, age 32 years, 10years of experience in NDT, Specialist in Auto-UT testing (Corrosion Mapping), Excellent experience in Manual UT inspection of flaw detection (I- Beams, Pates, Billets & various items) and weld inspection (Butt weld), Through knowledge about selection of probes and it’s technical fundamentals, ASNT UT, MT, PT, ET (Electromagnetic Testing), Tank-floor testing (MFL), Tube inspection (RFET), having knowledge about ASME, ASTM, AWS and BS standards.
Basic education in Electronics (Diploma), well versed with computer Hardware (servicing) and software (Operating Systems Win95-98 and millennium) / MS word, Excel, Power point, internet, Turbo Cad ver 3.0, (Computer Aided Drawing and Drafting Software), Good knowledge of manual Eng. Drawing, Servicing of Electronics items (if provided with suitable data). Fluent in English also served as Marketing Executive for selling computer and its peripherals (while in computer field), selling NDT related items, as well as for fetching jobs in industrial areas in Saudi Arabia (While in the field of NDT) , Self-driving.
Reason for searching new job - Lack of contracts with present employer

for enquires please send cc mail also to myakal@hotmail.com, prsu@vsnl.com



 
05:44 Jul-05-2001
mic
Re: NDT expert looking for employment : Indian national, age 32 years, 10years of experience in NDT, Specialist in Auto-UT testing (Corrosion Mapping), Excellent experience in Manual UT inspection of flaw detection (I- Beams, Pates, Billets & various items) and weld inspection (Butt weld), Through knowledge about selection of probes and it’s technical fundamentals, ASNT UT, MT, PT, ET (Electromagnetic Testing), Tank-floor testing (MFL), Tube inspection (RFET), having knowledge about ASME, ASTM, AWS and BS standards.
: Basic education in Electronics (Diploma), well versed with computer Hardware (servicing) and software (Operating Systems Win95-98 and millennium) / MS word, Excel, Power point, internet, Turbo Cad ver 3.0, (Computer Aided Drawing and Drafting Software), Good knowledge of manual Eng. Drawing, Servicing of Electronics items (if provided with suitable data). Fluent in English also served as Marketing Executive for selling computer and its peripherals (while in computer field), selling NDT related items, as well as for fetching jobs in industrial areas in Saudi Arabia (While in the field of NDT) , Self-driving.
: Reason for searching new job - Lack of contracts with present employer
.
: for enquires please send cc mail also to myakal@hotmail.com, prsu@vsnl.com



 
03:44 Jul-06-2001
Le Cuong
Re: NDT expert looking for employment Vietnamese national, age 29

Master of Engineering in X-ray Stress Measurement in Japan

Experience: 3 years in Rolling Production, 4 years in X-ray Stress Measurement.

4.5 years living in Japan

Language: English and Japanese

Achievement:

Award for excellent student

Scholarship for technical training in Japan

Computer skill:

C / Visual C++/ Pascal/ Microsoft Office/ Homepage & Internet

Self-driving.





 
01:04 Jul-22-2001
P.SRIDHAR REDDY
Re: NDT expert looking for employment

Sir
i am looking good emmployment with perminent job in India. I am attaching my C.V with this comments
and let me know further proccess.
thank you
your truly
p.s.reddy

CURRICULUM VITAE

Name : PALVAI SRIDHAR REDDY
Date of Birth : 17th August 1973
Marital states : Married
Permanent Address : Ramanna Gudum : Village,
Arvapally : Mondal,
Nalgonda : District,
A.P-508222, INDIA.
Phone: 0091-40-3718967
Address for Communication (E-Mail) : s_palvai@hotmail.com
Advance center of Technology,
P.O.Box: 72471, Tripoli, Libya.
Phone: 00218-21-4900661/62
Qualification : Diploma in Metallurgical
Engineering
Intermediate with science group

Specialization : ASNT Level-II in
a) Ultrasonic Test
b) Radiographic Test
c) Magnetic Particle Test
d) Dye Penetrent Test
Nationality : Indian
Languages known : English, Arabic, Hindi & Telugu.
Passport Number : U-664798
Valid up to : 3rd September, 2005.

Experience:

Being a NDT Multidiscipline practitioner, I have experience in various industries consist of petroleum industries on offshore and onshore, power plants, forge shop, foundry shop, fabrication, ship building, pressure vessels, pipe lines – both in shop and on site environment, and Aronatic industries also.

At M/S ADVANCE CENTER OF TECHNOLOGY -Tripoli, Libya. Working as NDT TECHNICIAN, From 4th August 1999 on words
Assignment details:

1) Conducting NDT Test on various jobs for different parties like Schlumberger Overseas Co.
Germanisher Lloyds.
2) NDT Training program as per ISO 9712 was arranged to the company sponsored candidates –
the companies being.
1.AGOCO 2.AGIP 3.PRC 4.RASCO 5.AAC & 6.Azzavya oil refinary company
3) My responsibilities in NDT Training Program as following
a) Preparation of NDT notes records and procedures as per ISO 9712 for NDT Level- I
b) Conducting U.T & M.T Theory classes
c) Giving U.T, R.T, M.T & P.T Practical Training(Level-I)
4) I did NDT (UT, RT&MT) Inspection on 4.5m Diameter kiln shell in M/S Libyan cement
company, Bengagi, Libya.
5) I did RT on 3, 4.5, 6 & 8 inch Diameter pipes in M/S West Libya Electric company Tripoli.
6) I did UT, RT, M.P.I & P.T on different aeronautic parts(Aluminum alloy and Ferrous alloys)
with Libyan AirLine Clint.
7) I did Thickness measurement on ship in M/S Ship Manufacture and maintenance Co. Misrata
8) I have worked at SIRTE HARBOUR Project and forforming UT, MPI testing on 0.917
meter diameter pipes at Sirte by using of AWS Standards.


9) I have worked on The Great Men Made Rever project and forfoming UT, MPI on
2.5,3.0,2.0and 1.8 meter diameter water pipe line in Water Pump stations at Sirt.
Profile of Advance Center of Technology:
It is a center with sophisticate facilities and latest equipment to cater to the needs of local industries and improve technological capacity of the country.

At M/S NDT CORROSION CONTROL SERVICE Abudhabi,U.A.E. As a NDT Technician from January 1998 to January 1999.

1) Worked in NPCC project Ruwais for Horton spheres and tanks performing UT, Rtand MPI by ADNCO specification.
2) Worked as NDT Inspector with RWTUV in their Umm-Al- Nar project carrying out UT on plates & pipes. MT &PT liaison with third party inspector.
3) Attended several call out jobs such as UT, MPI and RT of piping in M/S ADYARD. UT,RT,MT&PT of piping Fabrication for M/S PESCO . UT of pipes in M/S ABAN constructions
Profile of NDT Corrosion Control Service:
Multinational Company (UAE, OMAN & SAUDI) was carrying out NDT inspections for various customers. The inspection includes UT RT MT& PT.

At M/S ALKHAJA COOPER HEAT, MUSCAT, SULTANATE OF OMAN. As NDT Technician From July 97 to Dec 97.
UT & MPI tests on LNG upstream pipeline Project as per API 1104 & PS 02 standard
Carried out UT, RT, MT& PT Tests of Cement plant & Steel plant equipment like Kiln shells, pressure vessels, and pipes mineral processing plant equipment. Also for Steel plant forging and castings as per ASME codes.
Profile of Al khaja Cooper Heat:
It is multinationals company and Carry out the NDT inspectors to different custemers mainly petroleum companies and power plants.

At M/S KITTI STEEL Ltd. (Heavy Eng. Division), A.P, India.
As NDT Engineer From May 96 to June 1997.
Supervising and cross checking, the RT, UT, MT, & PT Jobs carried out by NDT Technicians deputed for various projects. The company had several fabrication contracts involving welds of NDT requirements. I have tested and cross-checked several critical parts containing butt welds, nozzle welds of set on and set through configuration, tubular structures.
Profile of Kitty Steel Ltd.:
Reputed organization for design, manufacturing, installation and commissioning of different equipment related to cement pant.

At M/S HYDERABAD CASTING Ltd. A.P, India. As a NDT Supervisor From Apr 95 to Apr 96.
Carrying out supervision of engineering assignments and underwent practically
NDT training on pre-fabricated defect samples of various sizes and various configurations.
Profile of Hyderabad Casting Ltd.:
This company makes all type of castings for different type of customers especially tractor engine body and other oil engines.

Industrial training

Industrial training (5th and 6th semester in Diploma course)
I did apprenticeship in two different Indian Government companies, shown below.
1) M/S PRAGA TOOLS Ltd. A.P, India. (from march 93 to August 93)
2) M/S HMT Bearings Ltd. A.P, India. (from August 93 to march 94)


Experience summery

My responsibilities include select the NDT method which will satisfy the design of the objective of the specific article and performing all NDT (U.T, R.T, M.T&P.T) methods by standards and directly reporting to Q.C manager.
I was engaged in carrying out test on plates and pipes on weld configurations like butt weld, T-welds, corner welds, all configuration welds like nozzle welds longitudinal welds in pipes. Also carried out UT on forging and castings and detected defects size by using appropriate sizing methods like 6dB or 20dB methods and detecting the sensitivity (defect) by using of 80% back wall echo or DGS or DAC methods.
In RT testing, I did work on piping, pressure vessels and tanks. I can use various RT techniques like DWDI, SWSI and DWSI by using of X-ray or Gamma ray source.
Conversant with all safety aspect of Radiographic test. I did interpret the films to different codes like ASME, ANSI, API and DIN standard.
I have extensively used PROD and YOKE methods and inspect Butt, Fillet welds and parent metals of certain boiler components. I can inspect all type of forging and casting as per standards.
I did PT on raw metals & all type welds, using both visible and fluorescent methods and varies type of industry jobs.


Equipment Handled:

Ultrasonic testing devises: Kraut krammer (USK 7, USK 7S, USK 7D), Electronic and Engineering company(ESM 2M, ESM 2T), SIRIO Ultrasuoni-M01(R-3000), KARL DEUTSCH.
Ultrasonic thickness measurement devises: Kraut krammer (DM 4, DM 4E), Panametrics (25 DL).
Radiographic testing devises: X- Rays ANDREX 225(SMART-225), ANDREX 200 (SMART-200 Panoramic), ã-Rays GAMMAT T01-F ( Ir-192).
Magnetic particle testing: Magnoflux Y 6 (YOKE) AC, Y4 (YOKE) AC& DC, Magnoflux permanent YOKE, Magnoflux P920 (Coil and prods), TIEDE YOKE (TWM 230A), Johnson & Johnson portable MPI devises per prods, head shot and central conductor.
Liquid penetrant testing: All type of liquids (pentrant, Developer and cleaner) are from Magnoflux, ELY& TIEDE.
Computer knowledge: I have knowledge in computer in AutoCAD2000, Microsoft word, Microsoft excel and Microsoft Power Point.

Place: P.SRIDHAR REDDY



 
01:09 Jul-22-2001
P.SRIDHAR REDDY
Re: NDT expert looking for employment
Sir I am looking good eployee for permenent job. I am attaching MY CV with this comments. Let me know further proccess.
thank you
your truly
reddy

CURRICULUM VITAE

Name : PALVAI SRIDHAR REDDY
Date of Birth : 17th August 1973
Marital states : Married
Permanent Address : Ramanna Gudum : Village,
Arvapally : Mondal,
Nalgonda : District,
A.P-508222, INDIA.
Phone: 0091-40-3718967
Address for Communication (E-Mail) : s_palvai@hotmail.com
Advance center of Technology,
P.O.Box: 72471, Tripoli, Libya.
Phone: 00218-21-4900661/62
Qualification : Diploma in Metallurgical
Engineering
Intermediate with science group

Specialization : ASNT Level-II in
a) Ultrasonic Test
b) Radiographic Test
c) Magnetic Particle Test
d) Dye Penetrent Test
Nationality : Indian
Languages known : English, Arabic, Hindi & Telugu.
Passport Number : U-664798
Valid up to : 3rd September, 2005.

Experience:

Being a NDT Multidiscipline practitioner, I have experience in various industries consist of petroleum industries on offshore and onshore, power plants, forge shop, foundry shop, fabrication, ship building, pressure vessels, pipe lines – both in shop and on site environment, and Aronatic industries also.

At M/S ADVANCE CENTER OF TECHNOLOGY -Tripoli, Libya. Working as NDT TECHNICIAN, From 4th August 1999 on words
Assignment details:

1) Conducting NDT Test on various jobs for different parties like Schlumberger Overseas Co.
Germanisher Lloyds.
2) NDT Training program as per ISO 9712 was arranged to the company sponsored candidates –
the companies being.
1.AGOCO 2.AGIP 3.PRC 4.RASCO 5.AAC & 6.Azzavya oil refinary company
3) My responsibilities in NDT Training Program as following
a) Preparation of NDT notes records and procedures as per ISO 9712 for NDT Level- I
b) Conducting U.T & M.T Theory classes
c) Giving U.T, R.T, M.T & P.T Practical Training(Level-I)
4) I did NDT (UT, RT&MT) Inspection on 4.5m Diameter kiln shell in M/S Libyan cement
company, Bengagi, Libya.
5) I did RT on 3, 4.5, 6 & 8 inch Diameter pipes in M/S West Libya Electric company Tripoli.
6) I did UT, RT, M.P.I & P.T on different aeronautic parts(Aluminum alloy and Ferrous alloys)
with Libyan AirLine Clint.
7) I did Thickness measurement on ship in M/S Ship Manufacture and maintenance Co. Misrata
8) I have worked at SIRTE HARBOUR Project and forforming UT, MPI testing on 0.917
meter diameter pipes at Sirte by using of AWS Standards.


9) I have worked on The Great Men Made Rever project and forfoming UT, MPI on
2.5,3.0,2.0and 1.8 meter diameter water pipe line in Water Pump stations at Sirt.
Profile of Advance Center of Technology:
It is a center with sophisticate facilities and latest equipment to cater to the needs of local industries and improve technological capacity of the country.

At M/S NDT CORROSION CONTROL SERVICE Abudhabi,U.A.E. As a NDT Technician from January 1998 to January 1999.

1) Worked in NPCC project Ruwais for Horton spheres and tanks performing UT, Rtand MPI by ADNCO specification.
2) Worked as NDT Inspector with RWTUV in their Umm-Al- Nar project carrying out UT on plates & pipes. MT &PT liaison with third party inspector.
3) Attended several call out jobs such as UT, MPI and RT of piping in M/S ADYARD. UT,RT,MT&PT of piping Fabrication for M/S PESCO . UT of pipes in M/S ABAN constructions
Profile of NDT Corrosion Control Service:
Multinational Company (UAE, OMAN & SAUDI) was carrying out NDT inspections for various customers. The inspection includes UT RT MT& PT.

At M/S ALKHAJA COOPER HEAT, MUSCAT, SULTANATE OF OMAN. As NDT Technician From July 97 to Dec 97.
UT & MPI tests on LNG upstream pipeline Project as per API 1104 & PS 02 standard
Carried out UT, RT, MT& PT Tests of Cement plant & Steel plant equipment like Kiln shells, pressure vessels, and pipes mineral processing plant equipment. Also for Steel plant forging and castings as per ASME codes.
Profile of Al khaja Cooper Heat:
It is multinationals company and Carry out the NDT inspectors to different custemers mainly petroleum companies and power plants.

At M/S KITTI STEEL Ltd. (Heavy Eng. Division), A.P, India.
As NDT Engineer From May 96 to June 1997.
Supervising and cross checking, the RT, UT, MT, & PT Jobs carried out by NDT Technicians deputed for various projects. The company had several fabrication contracts involving welds of NDT requirements. I have tested and cross-checked several critical parts containing butt welds, nozzle welds of set on and set through configuration, tubular structures.
Profile of Kitty Steel Ltd.:
Reputed organization for design, manufacturing, installation and commissioning of different equipment related to cement pant.

At M/S HYDERABAD CASTING Ltd. A.P, India. As a NDT Supervisor From Apr 95 to Apr 96.
Carrying out supervision of engineering assignments and underwent practically
NDT training on pre-fabricated defect samples of various sizes and various configurations.
Profile of Hyderabad Casting Ltd.:
This company makes all type of castings for different type of customers especially tractor engine body and other oil engines.

Industrial training

Industrial training (5th and 6th semester in Diploma course)
I did apprenticeship in two different Indian Government companies, shown below.
1) M/S PRAGA TOOLS Ltd. A.P, India. (from march 93 to August 93)
2) M/S HMT Bearings Ltd. A.P, India. (from August 93 to march 94)


Experience summery

My responsibilities include select the NDT method which will satisfy the design of the objective of the specific article and performing all NDT (U.T, R.T,M.T&P.T) methods by standards and directly reporting to Q.C manager.
I was engaged in carrying out test on plates and pipes on weld configurations like butt weld, T-welds, corner welds, all configuration welds like nozzle welds longitudinal welds in pipes. Also carried out UT on forging and castings and detected defects size by using appropriate sizing methods like 6dB or 20dB methods and detecting the sensitivity (defect) by using of 80% back wall echo or DGS or DAC methods.
In RT testing, I did work on piping, pressure vessels and tanks. I can use various RT techniques like DWDI, SWSI and DWSI by using of X-ray or Gamma ray source.
Conversant with all safety aspect of Radiographic test. I did interpret the films to different codes like ASME, ANSI, API and DIN standard.
I have extensively used PROD and YOKE methods and inspect Butt, Fillet welds and parent metals of certain boiler components. I can inspect all type of forging and casting as per standards.
I did PT on raw metals & all type welds, using both visible and fluorescent methods and varies type of industry jobs.


Equipment Handled:

Ultrasonic testing devises: Kraut krammer (USK 7, USK 7S, USK 7D), Electronic and Engineering company(ESM 2M, ESM 2T), SIRIO Ultrasuoni-M01(R-3000), KARL DEUTSCH.
Ultrasonic thickness measurement devises: Kraut krammer (DM 4, DM 4E), Panametrics (25 DL).
Radiographic testing devises: X- Rays ANDREX 225(SMART-225), ANDREX 200 (SMART-200 Panoramic), ã-Rays GAMMAT T01-F ( Ir-192).
Magnetic particle testing: Magnoflux Y 6 (YOKE) AC, Y4 (YOKE) AC& DC, Magnoflux permanent YOKE, Magnoflux P920 (Coil and prods), TIEDE YOKE (TWM 230A), Johnson & Johnson portable MPI devises per prods, head shot and central conductor.
Liquid penetrant testing: All type of liquids (pentrant, Developer and cleaner) are from Magnoflux, ELY& TIEDE.
Computer knowledge: I have knowledge in computer in AutoCAD2000, Microsoft word, Microsoft excel and Microsoft Power Point.

Place: P.SRIDHAR REDDY



 
02:02 Oct-29-2001
MOHAMMAD TAHIR
RADIOGRAPHIC TECHNICIAN IAM EXPERIENCED X-RAY, C.T.SCAN AND M.R.I TECNICIAN FROM 1991, NOW IAM WORKING IN SAUDIA ARABIA, TAIF IN ONE ESTEEMED HOSPITAL SINCE 1995,


 


© NDT.net - The Web's Largest Portal of Nondestructive Testing (NDT) ISSN 1435-4934

Open Access Database, |Conference Proceedings| |Articles| |News| |Exhibition| |Forum| |Professional Network|