The Largest Open Access Portal of Nondestructive Testing (NDT)

362 views Job Offers Yong-Moo Cheong R & D, Korea Atomic Energy Research Institute, South Korea, Joined Nov 1998, 3 Yong-Moo Cheong R & D, Korea Atomic Energy Research Institute, South Korea, Joined Nov 1998 3 08:56 Sep-04-2009 Post Doctor or Post Master Position available Job Location: South Korea offered by Korea Atomic Energy Research Institute Korea Atomic Energy Research Institute (KAERI) is looking for a Post-Doctor and Post-Master Candidate. KAERI’s Nondestructive Material Characterization Group is performing a National Long-term Nuclear R&D Program on the “Development of Advanced Nondestructive Diagnostic Techniques for Micro-scaled Defects and Damage in Materials. Anybody who is interested in the ultrasonic method for materials characterization, such as nonlinear ultrasonics, EMAT, or phase array UT should send his/her resume to Dr. Yong-Moo Cheong at ymcheong@kaeri.re.kr. Specific details for an appointment will be discussed after document review.   Translate  Close

Product Spotlight Navic - Steerable Modular Automated Scanner StandJIREH Industries The Navic is a modular, motorized, steerable scanner designed to carry multiple attachments used ... in various scanning and inspection applications. The Navic is capable of weld scanning (girth welds and long seam welds), automated corrosion mapping, and tank scanning. > 5 Showcases5 Videos TESTD-PT SYSTEM StandTelops Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil ... ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials. > 2 Showcases iProbe - USB Phased Array Probe StandHi-Spec Systems Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas ... ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality. > 3 Showcases3 Videos FMC/TFM StandAdvanced OEM Solutions Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr ... oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are: Beautiful Image! Easier to understand what you're looking at Completely focused in entire image or volume Much easier to define setups before inspection Easier to decipher geometry echoes from real defects Oriented defects (e.g. cracks) are imaged better See image from different wave modes from one FMC inspection FMC data can be reprocessed/analyzed without going back to the field > 3 Showcases more Showcases

Share...

• Home
• Exhibition
• Archive
• Forum
• Jobs
• Members
• Events
• Directory
• NDT A-Z

• Advertise
• Privacy Policy
• Contact & Imprint
• About

© NDT.net - Where expertise comes together. The Largest Open Access Portal of Nondestructive Testing (NDT)- since 1996