where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

AT-Automation Technology GmbH
AT -Automation Technology is a systems house for industrial image processing. AT offers thermographic ndt systems as well as high-speed 3D sensors.

377 views
Career Discussions
Ebrahim Al-Wabary
Ebrahim Al-Wabary
16:32 Sep-11-2009
Salary rate and equipment supplier(TOFD/PHASED ARRAY)

We have a newly established NDT company is called EMTC(EKHTIBAR MATERIAL TESTING COMPANY ). It is highly appreciated and thanks for your help on the followings:

1. How much the salary rate to be paid for Level-III and Level-II who should have hands on experince of TOFD and Phased Array?
2. Any candidate resume you know of level-III&II with hands on experince of TOFD and Phased Array can be posted to us. An advertisment of the subject already included in the NDT forum job offer section.
3. To provide us information of TOFD and Phased Array equipment supplier other than Olympos in Saudia Arabia or any of Arabic Gulf countries.
4. What is TOFD and Phased Array equipment recommend and the qutation?
5.to provide us any available TOFD and Phased Array equipment procedures either GE or Olympos.

Best regard
Ebrahim Al-Wabary/EMTC company
Mob:.+966 504920561
e-mail: wabaryea@Gmail.com

    
 
 Reply 
 

Product Spotlight

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

NEOS III

NEOS III is Logos Imagings lightest DR system. With a built-in battery and internal wireless commu
...
nication, the NEOS III is perfect for users that want to quickly assess an item.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window