where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Controle Mesure Systemes
Contrôle Mesure Systèmes designs, develops and manufactures nearly 30 years a complete NDT range of products in eddy current and ultrasonic testing methods.

1147 views
Career Discussions
Kaushlendra
NDT Inspector, Pipeline Inspector Non-Metalic
Velosi LLC Oman, Oman, Joined Jun 2009, 2

Kaushlendra

NDT Inspector, Pipeline Inspector Non-Metalic
Velosi LLC Oman,
Oman,
Joined Jun 2009
2
19:51 Sep-15-2009
NDT –ASNT-II training course from Indo Tech Chennai India.

Dear Friends,

I would like to attend NDT –ASNT-II training course from Indo Tech Chennai India. Please any one of you can suggest me whether the course doing from this institute is good and classes are effective.

Because looking at the number of institutes available in the city it’s very difficult to decide which institute is good and classes are really good.

Please suggest me friends to finalize the Institute for my training.

Many thanks,
Regards

    
 
 Reply 
 
Hariharan
Hariharan
12:10 Sep-16-2009
Re: NDT –ASNT-II training course from Indo Tech Chennai India.
In Reply to Kaushlendra at 19:51 Sep-15-2009 (Opening).

Dear friend,

Nice to see your message. There are so many institutes in chennai and they all are conducting NDT courses. Many institutes are not having a proper study material and they used to give a xerox copy of some other author. My sugession is to do the course with Kalva Engineers Pvt Ltd, which is Hyderabad, chennai, cochin. Particularly this institute the course materials are prepared by Mr.Chandramurthy and Mr.Brahmaji Rao, both are ASNT Level III.
All the best.

    
 
 Reply 
 
S.R.G.PRABHU
Consultant, AUT specialist
FREELANCE, India, Joined Aug 2008, 63

S.R.G.PRABHU

Consultant, AUT specialist
FREELANCE,
India,
Joined Aug 2008
63
12:47 Sep-16-2009
Re: NDT –ASNT-II training course from Indo Tech Chennai India.
In Reply to Hariharan at 12:10 Sep-16-2009 .

I suggest no advertisement or abuse of any person or training company in this site....If someone wants to help , please be open and give a number of training institutes in chennai, from which the candidate can choose.Personal opinions may hurt someone.
Thanks and regards
Prabhu

    
 
 Reply 
 
muji
Consultant, Sr.QA/QC ENGINEER
ASNT SAUIDI ARABIA, India, Joined Aug 2007, 2

muji

Consultant, Sr.QA/QC ENGINEER
ASNT SAUIDI ARABIA,
India,
Joined Aug 2007
2
06:36 Sep-17-2009
Re: NDT –ASNT-II training course from Indo Tech Chennai India.
In Reply to Hariharan at 12:10 Sep-16-2009 .

Dear Friend,

Now a days Very difficult to find good trainer, can u check them must do good demostrate a practical one.rest every thing you will gain your experience.

    
 
 Reply 
 
Mathew Alexander
NDT Inspector, ASNT NDT Level III
PETROCHEM-ITSS, Saudi Arabia, Joined Aug 2009, 8

Mathew Alexander

NDT Inspector, ASNT NDT Level III
PETROCHEM-ITSS,
Saudi Arabia,
Joined Aug 2009
8
07:37 Sep-17-2009
Re: NDT –ASNT-II training course from Indo Tech Chennai India.
In Reply to Hariharan at 12:10 Sep-16-2009 .

I found that even *************** issued certificate for RT & UT to candidates who do not have any formal experience. As per SNT-TC-1A, the candidates should have minimum 1600 hours experience in each method to be certified to Level II. I found many technicians certified by Kalva do not have any experience.

This is not to hurt anybody, but to remind the Level IIIs to fullfill the requiremets if somebody wanted to issue certificates as per an international organization such as ASNT.

For your information, we stopped hiring NDT technicians who were certified by these money makers. Rather, we select technicians who have enough experience and certified by BARC or ISNT.

    
 
 Reply 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

Lyft™: Pulsed Eddy Current Reinvented

PEC Reinvented—CUI Programs Redefined Corrosion under insulation (CUI) is possibly the greatest u
...
nresolved asset integrity problem in the industry. Current methods for measuring wall thickness with liftoff, without removing insulation, all have severe limitations. Eddyfi introduces Lyft — a reinvented, high-performance pulsed eddy current (PEC) solution. The patent- pending system features a state-of-the-art portable instrument, real- time C-scan imaging, fast data acquisition with grid-mapping and dynamic scanning modes, and flexibility with long cables. It can also scan through thick metal and insulation, as well as aluminum, stainless steel, and galvanized steel weather jackets. Who else but Eddyfi to reinvent an eddy current technique and redefine CUI programs. Got Lyft?
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window