where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

296 views
Job Offers
A Murat
A Murat
17:19 Sep-18-2009
AUT NDT inspector

Posted by NEBEST
Job Location: Nigeria

Project : TOTAL USAN
Tasks
1.Follow-up the construction of UFR and Buoy activities in Nigeria and ensure the contract applies (both project specifications and schedule).
2.Monitor performance of NDE in terms of quality and frequency, ensuring conformity with relevant specifications and codes.
3.Identify the critical activities and bottleneck for the progress of the modules related to welding. Anticipate; propose solutions.
4.Follow up the NDE activities of UFR and Buoy and insure proper records (NDE/inspection records follow-up).
5.Review all NDE reports and interpret all of radiography films in addition to the third party interpretation. Monitor NDE execution like DP, MPI, RT, UT and AUT.
6.Monitoring of NDT subcontractor and Contractor inspectors qualification and performance.
7.Be the focal point with the Project NDT Engineer.
Monitors the implementation of safety procedures and working practices by Contractor. Special follow-up on Gamma/X-Ray.

Skills
Qualification: HND/HNC graduate or Degree qualified – Discipline: Offshore structural, piping and vessel specialist
Professional Experience: 10-15 years experience with Project background within Oil & Gas industry. Construction experience is required on structural, piping and vessel installations.
Experience on construction yard in construction contractor team is required. Experience on West African yards a plus.
Minimum 5 years experience in all aspects of Equipments and practical knowledge of applicable codes and standards such as ISO, API, ASTM and ASME.
Qualification level II on UT, RT and MPI as per EN 473.
Formal training in the time of flight diffraction techniques and automated ultrasonic testing.
Welding knowledge / Certificate would be an added advantage.
An autonomous supervisor with strong skill in Ommiscanner system for Pipe welding Control

Location :Port Harcourt, then offshore
Duration : 18 months min
Status : rotational 4 weeks on x 4 weeks off
Accomodation, food and laundry are provided by the company
All fees in charge of the company



Nebest COT

4 B Rue Aristide Briand

78130 Les Mureaux Yvelines, France

 
 

Product Spotlight

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

NEW Wheel Type Phased Array Probe

DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
...
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window