where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
203 views
Job Offers
Denny Meyer
R & D
University of applied sciences Magdeburg-Stendal, Germany, Joined Jan 2009, 4

Denny Meyer

R & D
University of applied sciences Magdeburg-Stendal,
Germany,
Joined Jan 2009
4
12:05 Sep-25-2009
NDT research project

Posted by Magdeburg-Stendal University of Applied Sciences
Job Location: Magdeburg, Germany

The Hochschule Magdeburg-Stendal (FH), University of Applied Sciences, has open positions within the research project “Development of microwave procedures for the non-destructive testing of fiber reinforced plastic components”. These positions are subject to granting the project. The positions are open to 1 November 2009 or later.

The positions are of scientific and non-scientific type and focused on Electrical engineering/High frequency engineering, Material science and Automatization, respectively.

You can find more information under

www.hs-magdeburg.de/zfp

 
 

Product Spotlight

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Ultrasonic Probe Recharacterization Service

NDT Systems offers a comprehensive Aftercare and Recharacterization Service for all our ultrasonic
...
probes. The Recharacterization Service is fully compliant with International ASTM E1065 Standard Guide (and other applicable standards) and offers complete documentation, traceable to the ASTM E1065 Standard. For more details or to schedule Recharacterization Services contact ndtsales@ndtsystems.com
>

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window