QC engineer/coordinator/inspection engineer
Job Location: world wide
17 years of experience in inspection of Brown field, shut down & revamping jobs in OIL AND GAS field.
PREPARING QCPs, ITPs, MS, WPS, INTERNAL AUDITING.
INSPECTION OF MATERIAL AT VENDOR (Pipe, fittings, valves, structural steel, etc)
PROCESS PIPING (SPOOL FABRICATION, FIELD INSPECTION), TEST PACKS.
INSTALLATION OF ONSHORE & OFFSHORE PIPE LINE (RIGID & FLEXIBLE)
FABRICATION & INSTALATION OF OFFSHORE JACKET, RISER, PLEM, I, J TUBES, WELL & PROCESS PLATFORM.
INSPECTION OF STATIC EQUIPMENTS, TANK (fixed. floating roof, LPG, LNG) AT VENDOR AND IN HOUSE SHOP.
STEEL STRUCTURE (PIPE RACK).
FURNACE, FLARE STACK, PAINTING, COATING.
WELDING, BONDING OF HDPE, GRE, NDT, SHUT DOWN & REVAMPING JOBS.
TRAINING IN NDT, WELDING.
NEW - TD Focus-ScanRX
The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
1. Data acquisition is significantly faster than current design
2. Better aesthetic – closely aligns with HandyScan RX
3. Improved IP rating (Target IP66)
4. Ruggedized housing
5. Connectors are protected from impact and ingress
6. Integrated stand and separate retractable handle
easy to keep clean)
7. Touchscreen with ruggedized display glass
8. 3-Axis encoder input
Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF
The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
Teledyne ICM’s CPSERIES has been designed with a view to
revolutionizing the handling and perfor
mances of portable X-Ray
sets. Despite having managed to halve the weight of similar
portable X-Ray generators available on the market (while
continuing to provide the same power output), the SITEX CPSERIES
generators feature a shutter, a laser pointer, a beryllium window,
an aluminum filter and two integrated diaphragms (customized sizes
are available upon request). Without compromising the robustness
and reliability for which ICM products are renowned, the small
size and light weight of the SITEX CPSERIES will radically change
the way that you perform your RT inspections. And you will see a
positive impact in terms of both quality and return on investment