where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
291 views
Job Offers
Mohammed Yusran
Mohammed Yusran
13:20 Sep-28-2009
ASNT NDT II/III Trainer, & PCN II/III Trainer/Examiner Wanted

Job Location: Jubail, Saudi Arabia
offered by Jubail Industrial College

Jubail Industrial College, Saudi Arabia is seeking Instructors for the following discipline:

PCN
JIC is looking for instructors certified with PCN level 2 and/or level 3 for RT, MT, UT PT, ET, PAUT and TOFD methods in oil and gas sector. The candidates have to show a minimum of 3 years of field experience. For UT, the NDT center is looking for the qualification of at least one or more of the following categories of 3.1, 3.2, 3.3, 3.8 or 3.9.
Only BINDT approved candidates will be contacted

ASNT
Seeking ASNT level III and Level II Instructors with 5 year plus of training & field experience in RT, MT, UT, PT, ET, PAUT and TOFD methods in oil and gas sector.
Please visit our website for more info regarding employment package and benefits.
http://www.jic.edu.sa

Please email resumes and inquires to yusran_m@jic.edu.sa / rupesh_n@jic.edu.sa

Mohammed Yusran
Course Co-ordinator
Jubail Industrial College
Kingdom Of Saudi Arabia

 
 

Product Spotlight

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Research and Applications Development For NDT

The Research and Applications Development (RAD) group is a newly formed team within Acuren dedicat
...
ed to tackling challenging inspection problems. Our focus is the development of novel, field deployable, advanced inspection techniques for use in cases where standard NDT methods are ineffective. We don't wait for new innovations, we engineer them. From concept to commissioning.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window