where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1198 views
Career Discussions
Nico Costermans
Nico Costermans
11:05 Oct-08-2009
Payment rate for NDT / Rope Acces in Netherlands and Belgium

Hey guys,

I am sort or les a beginner in NDT / Rope Access with UT2 3.1 3.2, MT2, PT2, IRATA level 1 and also offshore certificates.
Butt only once in a while offshore on the job that is planned.
Company called me that I can start but they asked me what I want to earn. So they can calculate if it is possible or not.

This is why I want to ask you guys if anybody can tell me from arround Netherlands or Belgium what I kinda need to ask as payment rate?
Ps: need to kn,ow this better fast then late. Company asked for this week.

Thanks so much,

Nico Costermans

Verdienste voor NDT / Ropa access in Nederland en Belgie

Hey de mannen,

Ik ben redelijk nieuw in NDT / Rope Access met UT2 3.1 3.2, MT2, PT2, IRATA level 1 en ook offshore certidicaten. Af en toe zal er hier dan ook offshore werk op de nieuwe geplande job aan te pas komen.

Een bedriijf belde me gister met de vraag wat ik wil verdienen. Zodat ze kunnen berekenen of het voor hen lukt.
Daarom zou ik jullie willen vragen welk bedrag ik nu zou moeten zeggen voor de verdienste in Nederland en of Belgie?

Alvast super veel dank,

Nico Costermans

    
 
 Reply 
 
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 302

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
302
11:46 Oct-08-2009
Re: Payment rate for NDT / Rope Acces in Netherlands and Belgium
In Reply to Nico Costermans at 11:05 Oct-08-2009 (Opening).

Nico,
It depends on if this is a full time position or if it is on an ad-hoc basis, and if ad-hoc, then how much work per week/month there will be on average.
You also have to take care that the company is large enough and makes payments regularly enough that you don't have problems surviving whist waiting for payments.
A direct contractor generally has more problems getting money than a contractor that works through an agency.

Regards,
Godfrey

Nico,
Het hangt eraf hoeveel werk deze bedrijf je aanbiedt. Is het een permanent baan of alleen een af-en-toe? Als het af-en-toe is, dan hoeveel werk gemiddeld per week/maand zou het zijn.
Je moet ook opletten dat de bedrijf een goed betaaler is en dat je geen probleem krijgt met je loon. Een direkt contractor heeft meer problemen met betaalingen als een contractor die door een agency gaat.
Groeten,
Godfrey

    
 
 Reply 
 
Nico Costermans
Nico Costermans
12:23 Oct-08-2009
Re: Payment rate for NDT / Rope Acces in Netherlands and Belgium
In Reply to Godfrey Hands at 11:46 Oct-08-2009 .

Hello Godfrey,

Should it be possible to give me +- some amounts?

Just that for now I don't have a clue what to ask.
And will ask if it is on permanent or ad-hoc.
Do you mean on freelance basis with ad-hoc?

Many thanks,

Nico

Hey Godfrey,

Zou het eventueel mogelijkjzijn om er een aantal bedragen op te kleven?
Gewoon omdat ik echt niet weet wat ik zou moeten vragen.
Zal dan ook eens te weten moeten komen of het permanent is of af-en-toe.
Bedoel je met deze af en toe dan op freelance-zelfstandige basis?

Heel veel dank,

Nico

    
 
 Reply 
 

Product Spotlight

AMIGO2

TSC Amigo2 - ACFM technology has developed a solid reputation for accurately detecting and sizing
...
surface-breaking cracks through paint and coatings. As the industry demands increased performance in speed, signal quality, and portability, it’s time for an evolution. It’s time for Amigo2.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

FlexoFORM™

The FlexoFORM™ solution integrates flexible phased array probe technology in a scanner to solv
...
e the challenges that come with inspecting pipe elbows. When combined with a water column, this solution can be used to collect easy-to-interpret data on elbows with diameters ranging from 4.5 in. OD up to flat and offers many benefits.
>

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window