where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
516 views
Technical Discussions
Mehdi Eskandarzade
Mehdi Eskandarzade
00:46 Oct-09-2009
Spiral coil in EMATs

Hello,

I am doing a research in my university. At a mean time I need to do simulation of 3D spiral coil in an EMAT system. Could you please provide me the typical dimensions of common Spiral coils that are used in an EMAT system?

Best Thanks,

    
 
 Reply 
 
Syed Ali
R & D,
Innerspec Technology, USA, Joined Oct 2009, 17

Syed Ali

R & D,
Innerspec Technology,
USA,
Joined Oct 2009
17
06:11 Oct-11-2009
Re: Spiral coil in EMATs
In Reply to Mehdi Eskandarzade at 00:46 Oct-09-2009 (Opening).

Please refer to Innerspec Technologies for all your emat needs. You can download our product/probe catalog which can provide you answers to most of your questions. Feel free to contact us for any further questions.

Size of spiral depends upon your application. For deeper penetration you may need a larger coil (maybe 0.75 to 1.0" diameter), for other applications a smaller coil would also work equally good.

Regards
Syed Ali

    
 
 Reply 
 

Product Spotlight

FlexoFORM™

The FlexoFORM™ solution integrates flexible phased array probe technology in a scanner to solv
...
e the challenges that come with inspecting pipe elbows. When combined with a water column, this solution can be used to collect easy-to-interpret data on elbows with diameters ranging from 4.5 in. OD up to flat and offers many benefits.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Panther

M2M PANTHER is a phased-array equipment designed for both desktop and industrial applications, offer
...
ing unparalleled performance in a compact unit. It combines the speed required for industrial integrated Phased-Array Ultrasound (PAUT) solutions, with the most complete set of total focusing method (TFM) imaging techniques, making it the ultimate tool for R&D and procedure qualification.
>

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window