S.R.G.PRABHU
 |  07:49 Oct-09-2009
CSWIP certified AUT (pipewizard)/ASNT LEVEL III/SCWI-AWS/OMNISCAN manual phased array trained Senior inspector!
Job Location: Worldwide Download  AUT Specialist Resume Virus Scan recommended!
Hello,
I am S.R.G.PRABHU; an Indian National worked in Europe, Asia, Middle East and West/North Africa.
I have completed my contract in Abu Dhabi for a short term job for NPCC as AUT specialist for an AUT contractor validation/verification job offshore for the client GASCO.
I completed my job in Angola since 12th Feb to 11th April to work as TOTAL CLIENT AUT SPECIALIST for their offshore pipe lay project. I just came back from Persian Gulf for a pipe lay job for STATOIL HYDRO -NORWAY as client AUT inspector FROM Dec 07 to Feb 01, 2009. Previously I was working for ENI GAS in an offshore platform in Libya as Inspection supervisor from Oct2007 to Dec 2008, managing inspection activities in the offshore gas gathering platform called SABRATHA. I completed my contract with QATARGAS II, offshore Qatar for 42 inch condensate project since April 07 TO Oct 07 as client LEAD inspector( AUT SURVEYOR). Last year I was in an offshore pipe lay project in Persian gulf for Statoil -Norway as Client AUT surveyor in a Pipe lay barge. Previously I worked in Sakhalin island for RGS-Russian German consortium which was the sole inspection authority for Sakhalin II phase II projects. I was a third party AUT inspector onboard SEMAC-I, overseeing Saipem techs every day work from July2005 to Nov2005.
From 2003 June to 2004 March, I was a SHELLDEEPWATER NIGERIA (SNEPCO) a division of DEEPWATER SHELL-HOUSTON client AUT/ SENIOR WELDING inspector for their deepwater pipe lay project, 'Bonga' in Nigeria and Paris-France. From 2001 to 2003 I was a Exxon Mobil Nigeria client inspector offshore.
I have worked in France, Nigeria, Oman, Qatar, Angola, Saudi, China and India and also Persian gulf. My experience includes Refineries, Petrochemical, Desalinations, Pipelines on and offshore, offshore structures including risers and deepwater J-lay. I am flexible, team man and constantly learning to improve my quality of work.
I am CSWIP AUT PHASED ARRAY DATA INTERPRETER (as per EN 473) from TWI north- Middles borough, ASNT LEVEL III in RT and UT, Senior welding inspector from AWS, and OLUMPUS OMNISCAN PHASED ARRY MANUAL UT trained and certified as Level II with my offshore survival(BOSIET-OPITO CERTIFIED), and H2S both valid currently and till April 2012.
I am looking forward hearing from you soon.
Regards
--
S.R.G.Prabhu M.Sc,
ASNT LEVEL III -RT,UT.
CSWIP-AUT PHASED ARRAY DATA INTERPRETER LEVEL II
SCWI-AWS
OLYMPUS OMNISCAN MANUAL PHASED ARRAY LEVEL II
Telephone:0091 44 249 80795 91960081598
No-3, Second street, Maris avenue, Collector's office road,
Cantonment, Trichy-620001
Tamilnadu state India |
 IntraPhase Athena Phased Array SystemThe Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha ... sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION. >  FMC/TFMNext generation for Phased Array UT is here now with FMC/TFM! Have higher
resolution imaging, impr ... oved signal to noise ratio, characterize, size and analyze
defects better with access to several wave mode views and save raw FMC data for
higher quality analysis. Some of the benefits are:
- Beautiful Image! Easier to understand what you're looking at
- Completely focused in entire image or volume
- Much easier to define setups before inspection
- Easier to decipher geometry echoes from real defects
- Oriented defects (e.g. cracks) are imaged better
- See image from different wave modes from one FMC inspection
- FMC data can be reprocessed/analyzed without going back to the field
>  Immersion systemsScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a ... n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates.
All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs.
Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>  Wireless TOFD scanner Quick, accurate and highly reproducible welds testing.
The System operates wirelessly and is compat ... ible with any type of
Windows based Laptop, Desktop or Tablet. > |
|
188 views
Job Seeks
