where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

242 views
Job Offers
Anne Marie
Oceaneering International Ltd., United Arab Emirates (UAE), Joined Oct 2009, 1

Anne Marie

Oceaneering International Ltd.,
United Arab Emirates (UAE),
Joined Oct 2009
1
15:50 Oct-15-2009
Delivery Manager, Exports

Posted by Oceaneering International
Job Location: Baku, Azerbaijan

An urgent vacancy exists for a Delivery Manager based in Baku, Azerbaijan. This position is responsibile for all Personnel assigned on behalf of Oceaneering to the Client Asset, both On and Offshore.

Duties include:-

To deliver safety, KPI’s and Budgets for BP Corrosion and Inspection Management (CIM) contract.

Deliver Oceaneering Technical Integrity Assurance support as the accountable individual, to the Client, as defined in the contract agreement under CIM scope.
Ensure Regulatory and BP standard compliance
Responsible for management of Oceaneering contract providing assurance on technical delivery and cost management.
Responsible for production of Oceaneering Monthly Performance Management Report
Responsible for the production of the Installation Annual Inspection Plan and assist in the development of appropriate budget

Ensure Oceaneering provide sufficient competent personnel in the areas of service management, technical control, and corrosion/inspection engineering and specialist technicians to deliver the service.

Ensure such personnel work within their competency responsibilities and areas of scope and that such work is carried out within framework of appropriate legislation.

Carry out regular audits and assessment of the service, monitor and review any impact of changes in standards and legislation for continued correct delivery.

Ensure that personnel identify with and achieve, the necessary Health and Safety performance standards associated with the relative risks to personnel and plant in their environment and daily work

Develop and agree, Key Performance Indicators, both federal and asset specific and ensure that agreed data and actions necessary to deliver are provided

Facilitate the development and continuous improvement of the integrity process between
Oceaneering and the Client within and across various assets

Responsible for the commercial implementation of the contract, correct identification of areas of work, manpower demands and trends, focused budget estimates and completion of scopes within the estimates

Ensure that business and HSE risk implications of integrity issues are clearly identified and assessed for consideration within the Oceaneering Integrity Management Team and communicated to the Client

Ensure that the best practices, technology, techniques and innovation, developed and implemented across similar integrity contracts are notified and applied to the assets to optimise plant availability and safety

Carry out monthly business unit meeting to review ongoing performance and highlight areas of concern that require the Client/Oceaneering support

Manage the development of the annual ICM budget for the assigned Asset and report performance on a monthly basis to the Client

All work to be carried out in accordance with the Company Health, Safety, Environmental and Quality Systems.

Safety

Ensure that safety policies and procedures are understood and adhered to so far as is reasonably practicable in order to ensure a safe working environment.

Other

Carry out work in accordance with the Company Health, Safety, Environmental and Quality Systems.

Perform the assigned tasks with due diligence regarding the Integrated Management Systems on the Company.

Eliminate waste of whatever form, to suggest the use of more environmentally friendly substances and practices and contribute to the continuous improvement of the environment.

Interested candidates should apply to: http://www.oceaneering.com/employment/

 
 

Product Spotlight

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window