where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

787 views
Technical Discussions
Ali AL_Dawji
Engineering, Doctor course student
Japan, Joined May 2001, 4

Ali AL_Dawji

Engineering, Doctor course student
Japan,
Joined May 2001
4
00:58 Jul-16-2001
Ultrasonic computed tomography

Has anyone any information related to Ultrasonic computed tomography method to compute and reconstruct bubbles of air inside the soft tissue?

thanks



 
 Reply 
 
Wieslaw Bicz
Engineering,
PBP Optel sp. z o.o., Poland, Joined Feb 2009, 276

Wieslaw Bicz

Engineering,
PBP Optel sp. z o.o.,
Poland,
Joined Feb 2009
276
01:39 Jul-16-2001
Re: Ultrasonic computed tomography

: Has anyone any information related to Ultrasonic computed tomography method to compute and reconstruct bubbles of air inside the soft tissue?
.
: thanks
.
We are working on the system, that based on our holographic camera for fingerprint recognition should be able to do this job too.
This is a device, that is both holographic and tomographic and will be able achieve 3D resolution of at least 0.1mm.

If you are interested in cooperation on this area or would like to buy such system, please contact me: W.Bicz@optel.pl.

Wieslaw Bicz



 
 Reply 
 
Martin Schickert
R & D,
Institute for Materials Research and Testing, Germany, Joined Jan 2000, 18

Martin Schickert

R & D,
Institute for Materials Research and Testing,
Germany,
Joined Jan 2000
18
01:43 Jul-16-2001
Re: Ultrasonic computed tomography
: Has anyone any information related to Ultrasonic computed tomography method to compute and reconstruct bubbles of air inside the soft tissue?
.
: thanks
.

Have a look to the working group of Prof. Ermert at Ruhr-University Bochum, Germany. It is one of their research focuses.

Publication list (mainly English, some downloads):
http://www.hf.ruhr-uni-bochum.de/ -> Lehrstuhl HF-Technik -> Bibliothek -> Veröffentlichungen



 
 Reply 
 

Product Spotlight

Micro CT

nanoVoxel series has nano-scale resolution upto 500nm by using high voltage X-ray source (from 80-
...
300 kV) with micro/nano focal spot and highly sensitive flat panel detectors and unique Optical coupling detector.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection

This set of two blocks has been specially designed for situations where ultrasonic examination tak
...
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window