where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Volume Graphics GmbH
Leading industrial companies around the world look for defects in their products using Volume Graphics software.

1570 views
About NDT.net
Rolf
Director,
NDT.net, Germany, Joined Nov 1998, 604

Rolf

Director,
NDT.net,
Germany,
Joined Nov 1998
604
18:35 Oct-21-2009
Two New Forum Functions
zoom image

We integrated two new forum functions.

1. Attention to Messages with no Answer

A new filter function shows messages only which did not received any answer.
After a few days it may be difficult to get attention to a message in the crowed of so many new messages. So let us try to help those people which did not get any answer.
You can find the new link "Messages with no Answer" near the link "More Messages".

2. Repeat part of original text in email

In the forum email message is now shown the first 150 characters a part of the original message.
Example:
In Reply to Mark on 21:06 Oct-20-2009
Mark's Message: "Hi Roger, Yeah they are using sub arc (I should have said before). They make sub surface christmas trees and apparently spent a fortune on getting .............."

This may help to better understand the matter of a reply. Of course still you can get the best overview on the web page

Comments and suggestions are welcome.

Rolf

    
 
 
Rolf
Director,
NDT.net, Germany, Joined Nov 1998, 604

Rolf

Director,
NDT.net,
Germany,
Joined Nov 1998
604
19:33 Oct-21-2009
Re: Two New Forum Functions
In Reply to Rolf at 18:35 Oct-21-2009 (Opening).

zoom image


new option

Hi All,

As usually the best solution comes at the end!

Now we indicate near the subject the icon "seeking replies" for messages which did not received any reply.

In this case the filter for the complete message list is not necessary.

Rolf
    
 
 
ezio
Other, Retired ex Laboratory Technical Manager
OMECO Research Centre, Italy, Joined Sep 2008, 273

ezio

Other, Retired ex Laboratory Technical Manager
OMECO Research Centre,
Italy,
Joined Sep 2008
273
16:46 Oct-24-2009
Re: Two New Forum Functions
In Reply to Rolf at 19:33 Oct-21-2009 .

OK Rolf, two good ideas! can you let me to filter the e-mail with Answer (my old idea)?
ciao

    
 
 
Rolf
Director,
NDT.net, Germany, Joined Nov 1998, 604

Rolf

Director,
NDT.net,
Germany,
Joined Nov 1998
604
16:58 Oct-24-2009
Re: Two New Forum Functions
In Reply to ezio at 16:46 Oct-24-2009 .

Hi Ezio, good to remember me although it is not so easy function, but I will try it soon.

    
 
 
Rolf
Director,
NDT.net, Germany, Joined Nov 1998, 604

Rolf

Director,
NDT.net,
Germany,
Joined Nov 1998
604
20:41 Oct-25-2009
Re: Two New Forum Functions
In Reply to ezio at 16:46 Oct-24-2009 .

Okay Ezio, I did an over shift!
Your suggested function is ready. See earlier description below from Apr-14-2009.
In this distributed email you can find already a link at the bottom line called "Unsubscribe from this discussion topic". You must enter the member login as mentioned in the email.

--------------------------------------------
14:38 Apr-14-2009 Re: forum evolution
In Reply to ezio on 22:16 Apr-07-2009 .

Hi Ezio,

Your suggested option seems to be an excellent idea.
I understand this option like this:
A member subscribe to receive topics by email of a forum board, e.g., technical discussions.
A new topic rise but it is not interested for this user (e.g., UT man not interested in discussion about RT).
The user can click a link in the message "do NOT send me emails of replies of this topic".

Is that what you want? Then we will add this option to the ToDo list.

Rolf
----------------------------------------------

    
 
 

Product Spotlight

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

TOPAZ® 64: Fully Integrated Portable 64 Channel PAUT Instrument with FMC & TFM

Introducing TOPAZ64, the industry’s most intelligent fully integrated, portable 64-channel phased
...
array ultrasound (UT) instrument. TOPAZ64 combines code-compliant phased array UT with the industry’s most advanced full matrix capture (FMC) and total focusing method (TFM) capabilities. Featuring the highest acquisition frequency in its class, high resolution FMC and a 12” multi-touchscreen, users can easily visualize even the smallest flaws. TOPAZ64 can generate a bipolar pulse that provides more acoustic energy versus previous models for punching through thick components. The result is a portable tool that delivers increased inspection coverage, more accurate signals, and the ability to handle all UT inspections in one package. TOPAZ64 is ideal for challenging applications in transportation, oil and gas, manufacturing and power generation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window