where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

182 views
Job Offers
F.D.LEO DAVID
F.D.LEO DAVID
08:32 Oct-31-2009
Level III - RT,UT,ET,LPT

Job Location: Singapore
offered by NDT SUPPLIES

MOST URGENT & IMMEDIATE REQUIREMENT - Excellent Opportunity

We are looking for a Level III as QA Manager for our client in Singapore.

Minimum Job Requirement:

1. Degree or Diploma in Aerospace/Mechanical Engineering or equivalent
2. ASNT or NAS 410 Level III in Liquid Penetrant, Ultrasonic, Eddy Current and Radiography (RT, UT, PT, ET)
3. Minimum 3 years’ relevant working experience, preferably in the aviation industry
4. Strong planning, analytical and communication skills

For further details, contact :
Mr.MARTIN PRABHU

NDT SUPPLIES
90/1, Yamuna street,
Chinmaya nagar,
Stage - 1,
Chennai - 600 111
PH : 044 42103390 / 26205511
Email : ndtsupplies@airtelmail.in

    
 
 

Product Spotlight

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window