where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Hillger Ing. Büro
was founded in 1984 and develops special ultrasonic imaging systems for high-tech materials.

1058 views
Technical Discussions
Herve Saint-Surin
Consultant
S. D. International C.A., Venezuela, Joined Jun 2001, 12

Herve Saint-Surin

Consultant
S. D. International C.A.,
Venezuela,
Joined Jun 2001
12
04:20 Jul-25-2001
LMA equipment

I'm looking for LMA (Lost of Macanical-cross-section Area)equipment to evaluate hoist wire rope. Appreciate any information about companies or technologies related.
Thanks in advance.


    
 
 
Apostolos Tsimogiannis
Engineering, and R&D and NDT Inspector
ENVIROCOUSTICS SA, Greece, Joined Jan 2000, 2

Apostolos Tsimogiannis

Engineering, and R&D and NDT Inspector
ENVIROCOUSTICS SA,
Greece,
Joined Jan 2000
2
05:30 Jul-25-2001
Re: LMA equipment
: I'm looking for LMA (Lost of Macanical-cross-section Area)equipment to evaluate hoist wire rope. Appreciate any information about companies or technologies related.
: Thanks in advance.
.

There are a number of instruments out at the moment that do the job you describe. INTRON is one of the well known manufacturers of such equipment and their products are fully automated and very simple in use and compact. You can read some information about the products at:

http://www.envirocoustics.gr/products/wire_rope_eng.htm

On Envirocoustics web site there are also links to INTRONs home page for more info





    
 
 
Michael Trinidad
Consultant,
LMATS Pty Ltd , Australia, Joined Jan 2003, 138

Michael Trinidad

Consultant,
LMATS Pty Ltd ,
Australia,
Joined Jan 2003
138
06:02 Jul-26-2001
Re: LMA equipment
Zawada NDT make a very good instrument I had the pleasure of using a few years back http://www.webmedia.pl/zndt/eng.html

We purchased one for an NDT unit in Australia and this link is the story behind it http://www.ndt.net/wshop/forum/messages/108.htm

There are two Canadian companies that used to make equipment called Rotescograph and Magnograph.

Another manufacturer and information site is http://www.ndttech.com/

Kindest Regards

Michael Trinidad


    
 
 
Alexander Mironenko
Sales,
INTRON PLUS Ltd., Russia, Joined Sep 2001, 17

Alexander Mironenko

Sales,
INTRON PLUS Ltd.,
Russia,
Joined Sep 2001
17
08:08 Sep-11-2001
Re: LMA equipment
: I'm looking for LMA (Lost of Macanical-cross-section Area)equipment to evaluate hoist wire rope. Appreciate any information about companies or technologies related.
: Thanks in advance.
.
: Hello! You are welcome to visit Intron Plus Ltd. at www.intron.ru The company manufactures and markets worldwide wire rope flaw detector INTROS for measuring LMA and detection LF. Services from Intron are available as well.



    
 
 

Product Spotlight

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

FlexoFORM™

The FlexoFORM™ solution integrates flexible phased array probe technology in a scanner to solv
...
e the challenges that come with inspecting pipe elbows. When combined with a water column, this solution can be used to collect easy-to-interpret data on elbows with diameters ranging from 4.5 in. OD up to flat and offers many benefits.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window