where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
253 views
Job Seeks
Mehdi
Mehdi
20:05 Nov-27-2009
PhD position

Job Location: worldwide

I received my B.Sc and M.Sc both on Mechanical Engineering. currently
I am working as a lecturer at the urmia university of technology. I am
teaching NDT courses in this university. I have specialized in
Ultrasonics and very interested in non destructive evaluation topics
where I spend several ours a week to use ultrasonic devices.
Sometimes I come to ndt.net forum and discuss with experts about various NDT
topics. I succeeded to get Ultrasonic test certification Level I & II
from ASNT.
I am familier with FEM, FDM and mesh free method of DPSM as well as
programming methods using Matlab and C++ softwares. My last work on modeling
wave propagation phenomenon in EMAT system is under revision in J. of
Ultrasonics . I am looking for PhD position in NDE field in one credited university.

 
 

Product Spotlight

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window