where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

572 views
Technical Discussions
Mondonico Luca
NDT Inspector
SICES S.p.A., Italy, Joined May 2009, 7

Mondonico Luca

NDT Inspector
SICES S.p.A.,
Italy,
Joined May 2009
7
13:54 Dec-02-2009
SAFT

Could anyone give me more information about SAFT?

 
 Reply 
 
Abbas Bombaywala
NDT Inspector
Free Lance, India, Joined Jul 2007, 93

Abbas Bombaywala

NDT Inspector
Free Lance,
India,
Joined Jul 2007
93
07:12 Dec-03-2009
Re: SAFT
In Reply to Mondonico Luca at 13:54 Dec-02-2009 (Opening).

SAFT - The synthetic aperture focusing algorithms of time domain( TD-SAFT ) and frequency domain ( FD-SAFT ) are used to enhance the quality of scan image.

The synthetic aperture focusing technology (SAFT) seems two meanings. First,
take ultrasonic inspections of many smaller pies-electric elements at ordered position as one single inspection of a larger ultrasonic transducer. On the second, take the
actual testing facts that each transducer element transmits and receives the echo signal
one by one as if they work synchronously. It is simple to obtain the testing signal,
using a wide oriented transducer element scan alone the line, record the testing signal
of every position. Take a group of signals of scan position as a phased array,
dynamically focused on the point you care. In other words to add the signal of each
element at the time of pulse arriving the receivers.

 
 Reply 
 

Product Spotlight

Varex Imaging Large Field of View (FOV) Digital Detector Arrays (DDAs)

A larger FOV DDA can reduce the space and volume of the X-ray inspection system on the factory floor
...
, enable faster scanning times, better throughput and better resolution images at a lower dose. Customers can also save time and money. With these benefits in mind, Varex Imaging has designed a family of large FOV detectors (4343HE, XRD 1611, 4343DX-I, 4343CT) for our industrial imaging customers.
>

Ultrasonic Probe Recharacterization Service

NDT Systems offers a comprehensive Aftercare and Recharacterization Service for all our ultrasonic
...
probes. The Recharacterization Service is fully compliant with International ASTM E1065 Standard Guide (and other applicable standards) and offers complete documentation, traceable to the ASTM E1065 Standard. For more details or to schedule Recharacterization Services contact ndtsales@ndtsystems.com
>

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

MANTIS

MANTIS is a compact, powerful and affordable flaw detector (16:64PR), dedicated to field operators
...
. This portable equipment offers standard (electronic-, sector-, compound scan, conventional UT for pulse-echo, dual array and TOFD inspections), and advanced phased-array (real-time TFM -Total Focusing Method). MANTIS benefits from the same intuitive and user-friendly interface (CAPTURE) than Gekko for easier inspections.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window