where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

471 views
Technical Discussions
Dick Gray
Engineering,
Canada, Joined Nov 1999, 14

Dick Gray

Engineering,
Canada,
Joined Nov 1999
14
14:15 Dec-15-2009
MT yokes

Does anyone know a vendor who can supply 110 volt, 60 Hz, yokes that are:

1) Capable of meeting ASME Section V
2) Electrically certified for use in Canada
3) Certified as IP 65 rating or better under ANSI/IEC 60529 - 2004 Degrees of protection provided by enclosures

    
 
 
Roger Duwe
NDT Inspector, API-510, 570, 653
MISTRAS, USA, Joined Jan 2009, 148

Roger Duwe

NDT Inspector, API-510, 570, 653
MISTRAS,
USA,
Joined Jan 2009
148
14:42 Dec-15-2009
Re: MT yokes
In Reply to Dick Gray at 14:15 Dec-15-2009 (Opening).

Have you checked with Magnaflux and/or Parker Probe? They are the major manufacturers. Unless the Canadian regulations are rediculously onerous, they will have one that will work. There are even yokes certified for underwater work.

    
 
 

Product Spotlight

Spot weld inspection with Phased Array – PHAsis.one

The first PAUT spot weld inspection device offering a physical resolution of the spot weld diamete
...
r better than 0.35mm. Precise: more than 700 real UT measurements per spot weld. Easy to go: minimal training required due to the user friendly inspection software. Be sure: safe evaluation due to the imaging result display and automated creation of an evaluation proposal for the spot weld quality.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

CIVA 2017 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

35 years of VOGT Ultrasonics!

This year we are celebrating a company anniversary! 35 years have passed since we first took our t
...
est device and swung the probe on behalf of safety. But our ultrasonic know-how goes back many years..
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window
s