where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

275 views
Job Offers
Mohammed Aarif
Mohammed Aarif
14:09 Jan-11-2010
NDT Technician Level II (TOFD) for Scrub Collomes SCC Inspection

Posted by Inetgen
Job Location: Middle East

Job Title: NDT Technician Level II (TOFD) for Scrub Collomes SCC Inspection
Location: Across GCC Countries
Job Type: Forthcoming Shutdown projects
Salary: DOE


POSITION DESCRIPTION
NDT Technician Level II (TOFD) for Scrub Collomes SCC Inspection required for forthcoming shutdown projects across GCC Countries. Final interview expected during 1st week of Feb 2010. Project to start in first Quarter of 2010.

Primary responsibilities will include:
• Specific task is to perform standard NDT Technician duties and also supervise all plant NDT activity" Design, schedule, and perform all NDT functions within a growing plant"
• Manage all testing and report of NDT functions- (TOFD) for Scrub Collomes SCC Inspection
• Work with preventive maintenance on all NDT equipment
• Work to train and manage all NDT staff" CoOrdinate NDT schedules"
• Write NDT procedures and administer within plant
• Assist in all NDE testing" Interpret all NDE/NDT testing
• Sign off on all NDE/NDT documentation" Supply technical support to all areas in plant related to NDT function
• Assist in maintenance, repair , and troubleshooting of electrical equipment in a growing plant to keep NDT function at peak efficiency
• Perform other NDT and maintenance related tasks as assigned by Supervisor

POSITION REQUIREMENTS
• The ideal candidate should have diploma in engineering or equivalent.
• At least 9 years of related experience Experience in the Oil and Gas sector is highly desirable.
• Hands on Experience with oil and Gas Static Equipment.
• ASNT/PCN level-II qualification required
• Should be fully conversant with MS Office.
• Good interpersonal and communication skills are essential, as well as the ability to work well in a team environment

To apply, please send your CV and covering letter to: maarif@inetgen.com or you reach us at +91 022 40051023/+91 9821337080

 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Echomac® PA Bar Tester

The Echomac® PA BT provides 100% inspection of round bars for core and surface defects, at speeds u
...
p to 2 m/sec, depending on the specific application. The unit allows producers to handle a much larger range of diameters in one installation, and is available in 3 models to test 10 – 75mm diameter (small model); 20 – 130mm (medium model) or 50 – 254mm (large model) bars.
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window