where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

191 views
Job Offers
Mohammed Aarif
Mohammed Aarif
14:11 Jan-11-2010
NDT Assistant Level I

Job Location: Middle East
offered by Inetgen

Job Title: NDT Assistant Level I
Location: Across GCC Countries
Job Type: Forthcoming Shutdown projects
Salary: DOE


POSITION DESCRIPTION
NDT Assistant Level I required for forthcoming shutdown projects across GCC Countries. Final interview expected during 1st week of Feb 2010. Project to start in first Quarter of 2010.

Primary responsibilities will include:
• Set up and utilize Nondestructive Test equipment
• Assist NDT Technicians in the calibration of NDT equipment
• Assist NDT Technicians conduct tests to ensure quality or detect discontinuities (defects) using NDT methods of inspection
• Record results of inspections
• Assist Technicians in performing NDT procedures and other operations
• Perform other job related tasks as assigned by management

POSITION REQUIREMENTS
• At least 3 years of hands on experience in the inspection and testing works in the Oil and Gas related industries.
• ASNT/PCN level-I qualification required
• Should be fully conversant with MS Office.
• Good interpersonal and communication skills are essential, as well as the ability to work well in a team environment

Please send us your updated resume in word format, including your contact details. So we can discuss this opportunity in details.
To apply, please send your CV and covering letter to: maarif@inetgen.com or you reach us at +91 022 40051023/+91 9821337080

    
 
 

Product Spotlight

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

High-end Ultrasonic Flaw Detector with 32:128PR PAUT and 2-ch TOFD: SyncScan 2

SIUI’s newly launched SyncScan 2, is a high-end ultrasonic flaw detector with 32:128PR PAUT and
...
2-ch TOFD, which can maximize your efficiency for PA and TOFD. ● Support PA/TOFD/UT ● 32-ch PA is more suitable for inspection on extra-thick wall and high-attenuation material. ● 32-ch PA and 2-ch TOFD work simultaneously. ● Support PR mode for corrosion inspection.
>

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window