where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Job Offers
Mohammed Aarif
Mohammed Aarif
14:17 Jan-11-2010
NDT Technician Required for Various Category:

Job Location: Middle East
offered by Inetgen

Category 1: NDT Technician Level II (UT/MPI/DP)
Category 2: NDT Technician Level II (RT)
Category 3: NDT Technician Level II (Phased Array)

Location: Across GCC Countries
Job Type: Forthcoming Shutdown projects
Salary : DOE

NDT Technician Level II required for forthcoming shutdown projects across GCC Countries. Final interview expected during 1st week of Feb 2010. Project to start in first Quarter of 2010.

Primary responsibilities will include:
• Specific task is to perform standard NDT Technician duties and also supervise all plant NDT activity" Design, schedule, and perform all NDT functions within a growing plant"
• Manage all testing and report of NDT functions- UT, RT, etc
• Work with preventive maintenance on all NDT equipment
• Work to train and manage all NDT staff" CoOrdinate NDT schedules"
• Write NDT procedures and administer within plant
• Assist in all NDE testing" Interpret all NDE/NDT testing
• Sign off on all NDE/NDT documentation" Supply technical support to all areas in plant related to NDT function
• Assist in maintenance, repair , and troubleshooting of electrical equipment in a growing plant to keep NDT function at peak efficiency
• Perform other NDT and maintenance related tasks as assigned by Supervisor

• The ideal candidate should have diploma in engineering or equivalent.
• At least 9 years of related experience Experience in the Oil and Gas sector is highly desirable.
• Hands on Experience with oil and Gas Static Equipment.
• ASNT/PCN level-II qualification required
• Should be fully conversant with MS Office.
• Good interpersonal and communication skills are essential, as well as the ability to work well in a team environment

Please send us your updated resume in word format, including your contact details. So we can discuss this opportunity in details.

To apply, please send your CV and covering letter to: maarif@inetgen.com or you reach us at 022 40051023/9821337080


Product Spotlight

Mentor UT – Ultrasonic Phased Array Flaw Detector

With Mentor UT, you get an accessible and efficient inspection experience. Create user-defined menus
and workflows (“apps”) with GE’s desktop software Mentor Create to ensure consistency, even for the most complex inspections, every time. Mentor UT is the first UT device to easily allow wireless connectivity and live streaming, so you get second opinions when you need them most—in real-time.

Spot weld inspection with Phased Array – PHAsis.one

The first PAUT spot weld inspection device offering a physical resolution of the spot weld diamete
r better than 0.35mm. Precise: more than 700 real UT measurements per spot weld. Easy to go: minimal training required due to the user friendly inspection software. Be sure: safe evaluation due to the imaging result display and automated creation of an evaluation proposal for the spot weld quality.


Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field

Research and Applications Development For NDT

The Research and Applications Development (RAD) group is a newly formed team within Acuren dedicat
ed to tackling challenging inspection problems. Our focus is the development of novel, field deployable, advanced inspection techniques for use in cases where standard NDT methods are ineffective. We don't wait for new innovations, we engineer them. From concept to commissioning.

We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
this is debug window