where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

FI Test- und Messtechnik GmbH
a small high-tech company. We are focused on non-destructive measurement.

179 views
Job Offers
Mohammed Aarif
Mohammed Aarif
14:28 Jan-11-2010
NDT Supervisor Level III

Job Location: Middle East
offered by Inetgen

Job Title: NDT Supervisor Level III
Location: Across GCC Countries
Job Type: Forthcoming Shutdown projects
Salary: DOE


POSITION DESCRIPTION
NDT Supervisor Level III required for forthcoming shutdown projects across GCC Countries. Final interview expected during 1st week of Feb 2010. Project to start in first Quarter of 2010.

Primary responsibilities will include:
• The successful candidate will provide supervision, direction, and leadership through example for the department.
• Will support management of inspection programs.
• Will carryout/execute Inspection/Tests.
• As an NDT Supervisor you will coordinate activities of all NDT personnel.
• Capable to provide advice in the field of failure analysis.
• Must be knowledgeable about the identification and classification of various types of damage and be capable of discerning acceptable conditions.
• Will manage scheduling to ensure efficient and timely flow of product through the department.
• Will ensure that the inspection documentation and Kept up to date in SAP system.
• Maintain awareness of equipment condition, notifying Maintenance Manager of items requiring attention, and executing those actions necessary to maintain safe and effective equipment.
• Coordinate and provide training of personnel. Perform or coordinate Safety and Human Resource functions as appropriate within department.

POSITION REQUIREMENTS
• The ideal candidate should have diploma in engineering or equivalent.
• At least 10+ years experience in the inspection and testing of in-services oil and gas related equipment and facilities, both onshore and offshore.
• Hands on Experience with oil and Gas Static Equipment.
• ASNT/PCN level-III at least in 3 methods and CSWIP3.2 certification required.
• Proficiency in written and spoken English.
• Should be fully conversant with MS Office.
• Good interpersonal and communication skills are essential, as well as the ability to work well in a team environment

Please send us your updated resume in word format, including your contact details. So we can discuss this opportunity in details.

To apply, please send your CV and covering letter to: maarif@inetgen.com or you reach us at 022 40051023/9821337080

    
 
 

Product Spotlight

Research and Applications Development For NDT

The Research and Applications Development (RAD) group is a newly formed team within Acuren dedicat
...
ed to tackling challenging inspection problems. Our focus is the development of novel, field deployable, advanced inspection techniques for use in cases where standard NDT methods are ineffective. We don't wait for new innovations, we engineer them. From concept to commissioning.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

TVC awarded UKAS accreditation

TVC are delighted to finally announce we have been awarded UKAS accreditation for our calibration
...
laboratory. Laboratory accreditation to ISO/IEC 17025:2005 enables us to conduct the Electrical Verification of Ultrasonic Flaw Detection Equipment to BS EN 12668-1:2010. It has taken many months of hard work and we want to thank our staff for all their efforts during this massive undertaking.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window