where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

183 views
Job Seeks
M senthilkumar
M senthilkumar
11:20 Jan-30-2010
Welding inspector & qc inspector

Job Location: any where

I am applying for the post of Welding inspector & QA/QC inspector .
Qualification : Diploma in mechanical engineer , CSWIP 3.1 – Welding Inspector, Certified Welding Inspector from WRI , BHEL. and
ASNT Level II ( NDT ) - RT, UT, MT, PT
( Hands on Experience : Having 9 years experience in the
field of Oil & gas pipe line ,process piping ,Heavy Steel structural fabrication, , Machining, and Welding, NDT Manufacturing of Industrial Pressure parts.
Herewith I have attached my resume for your kind perusal.
Expecting your valuable response by replying at the earliest.

With warm regards,
M senthilkumar.
91 9894208523.
senthilkumar.maran@yahoo.com , llrara@yahoo.co.in

 
 

Product Spotlight

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Magnetic X-Ray Pipeline Crawler 6''-60''

Suitable to work in 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometer
...
s and provide the efficient inspection of the pipeline.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window