where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1151 views
Technical Discussions
Jean-Claude Schwartz
Jean-Claude Schwartz
11:26 Feb-09-2010
U8 Crack Microgauge

Hello,

Does anyone know if the U8 crack microgauge is still being manufactured today, and if so by whom?

 
 Reply 
 
Martin Lugg
Consultant,
TSC Inspection Systems, United Kingdom, Joined Nov 2000, 27

Martin Lugg

Consultant,
TSC Inspection Systems,
United Kingdom,
Joined Nov 2000
27
13:14 Feb-09-2010
Re: U8 Crack Microgauge
In Reply to Jean-Claude Schwartz at 11:26 Feb-09-2010 (Opening).

The U8 crack microgauge was a portable ACPD instrument, manufactured by Krautkramer under licence from Dover & Partners (based at University College London).
Manufacture was halted many years ago.

We (TSC - a successor to Dover & Partners) used to manufacture combined ACPD/ACFM instruments (called U9 and U10), but dropped ACPD due to low demand. However last year, following a series of enquiries by customers, we launched a new rugged ACPD instrument (called MkIV). For details, please refer to our website www.tscinspectionsystems.co.uk.

 
 Reply 
 

Product Spotlight

CIVA 2017 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Navic - Steerable Modular Automated Scanner

The Navic is a modular, motorized, steerable scanner designed to carry multiple attachments used
...
in various scanning and inspection applications. The Navic is capable of weld scanning (girth welds and long seam welds), automated corrosion mapping, and tank scanning.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window