where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1640 views
Career Discussions
Rafid O. López
, NDT Level 3
Mexico, Joined Jan 2010, 76

Rafid O. López

, NDT Level 3
Mexico,
Joined Jan 2010
76
21:52 Feb-22-2010
ASTM E1815

Someone has the norm ASTM E1815 Test Method for Classification of Film Systems for Industrial Radiography??

I do not need the updated norm.

Thanks all.

Rafid

    
 
 
Nigel Armstrong
Engineering, - Specialist services
United Kingdom, Joined Oct 2000, 1094

Nigel Armstrong

Engineering, - Specialist services
United Kingdom,
Joined Oct 2000
1094
14:08 Feb-23-2010
Re: ASTM E1815
In Reply to Rafid O. López at 21:52 Feb-22-2010 (Opening).

I have it, Rafid, but in ASTM Annual Vol 03.03. What do you want to check?

    
 
 
Rafid O. López
, NDT Level 3
Mexico, Joined Jan 2010, 76

Rafid O. López

, NDT Level 3
Mexico,
Joined Jan 2010
76
15:53 Feb-23-2010
Re: ASTM E1815
In Reply to Nigel Armstrong at 14:08 Feb-23-2010 .

Thanks Nigel.

I need to do a procedure in accordance with ASTM E1742 and i want to check this norm for reference and support, because i have the new approval from FAA in NDT area (RT).

Was only reference for my new procedure; yesterday i received the standard.

thank you very much Nigel.

Best regards

Rafid

    
 
 

Product Spotlight

Ultrasonic Flaw Detector & Thickness Gauge: Smartor

SIUI’s newly launched Smartor is a combination of ultrasonic testing and ultrasonic thickness me
...
asurement. ●IP 66 ●Compact size: 198 (W)* 128 (H) *520 (D) mm ●0.9kg only with battery ●5.7" LCD with high resolution 640×480 pixels ●One-hand operation ●Multiple conventional UT functions ●Smart Test Wizard ●Weld Simulation
>

Echomac® PA Rail Wheel Tester

MAC introduces two versions of Rail Wheel Testers using ECHOMAC® PA platform based on customer requ
...
irements.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window