where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

DASEL SISTEMAS
Our Phased Array equipments, based on SITAU Technology, are among the PAS highest performance in the market.
1648 views
Technical Discussions
Trinh Duy Dong
NDT Inspector, -
Vietnam, Joined Jul 2008, 4

Trinh Duy Dong

NDT Inspector, -
Vietnam,
Joined Jul 2008
4
18:54 Feb-25-2010
Ketos Ring

dear all!
how do you make the ketos ring? i have Draw( refe to E1444), good mechanic but i have not any information material ? is it low carbon material?
Regard

 
 Reply 
 
Rolf
Director,
NDT.net, Germany, Joined Nov 1998, 616

Rolf

Director,
NDT.net,
Germany,
Joined Nov 1998
616
19:06 Feb-25-2010
Re: Ketos Ring
In Reply to Trinh Duy Dong at 18:54 Feb-25-2010 (Opening).

I edited your spelling from 'kentos ring' to 'keto ring'. If you search the forum or web for ketos ring you will find better information.

 
 Reply 
 
rafid O. Lopez
rafid O. Lopez
22:58 Feb-25-2010
Re: Ketos Ring
In Reply to Rolf at 19:06 Feb-25-2010 .

Is more easy that you buy the Ring AS5282, is the same that Ketos Ring but wih more sensibility the diference is the annealing. Is difficult to find the ketos ring, and to make it more; many vendors say they sell the ketos ring, but really is the as5282 ring.

Best regards.

 
 Reply 
 
Jim Draper
Consultant, ASNT Level III MT PT RT VT
Draper NDT, USA, Joined Jul 2009, 99

Jim Draper

Consultant, ASNT Level III MT PT RT VT
Draper NDT,
USA,
Joined Jul 2009
99
16:53 Feb-27-2010
Re: Ketos Ring
In Reply to rafid O. Lopez at 22:58 Feb-25-2010 .

The material is AISI 01 tool steel from annealed round stock, hardness 90 to 95 HRB.

 
 Reply 
 

Product Spotlight

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Magnetic X-Ray Pipeline Crawler 6''-60''

Suitable to work in 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometer
...
s and provide the efficient inspection of the pipeline.
>

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window