where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Materials Research Institute
Consulting to the NDT industry.

418 views
Job Offers
Hera
Hera
08:30 Mar-02-2010
MT, PT, UT OCTG (EMI) & lifting Inspectors + Supervisors

Posted by Scomi OMS
Job Location: Indonesia, Malaysia, Singapore

Candidates are invited to submit their CV’s to take up positions as Supervisor's/Field Inspectors.
Must demonstrate fluency and comprehension in both written and spoken English, able to use Microsoft Word and Excel programs.

Experienced candidates with previous Oilfield related Tubular/Lift and weld inspection are invited to submit their CV’s.

6 Positions available for experienced Inspectors.

Ideally the experienced candidates will :

•Graduate from a Technical institution in Mechanical or Electrical disciplines.
•Posses ASNT certification in at least two of the more of the following Level II PT, MT, UT, ET, or EMI experience.
•Experienced in performing new/used API OCTG, drill string and BHA, lift equipment and weld inspection for both onshore and offshore locations.
•Undertaken Inspection to T. H. Hill DS – 1 or NS – 2, British Standard, DNV and API Standards.
•Be prepared to travel and work with minimal supervision for extended periods.

Applicant are invited to e mail their CV’s with photograph to the following mail box : herawati.suhendro@scomioms.com

Applications shall be held in the strictest of confidence.
Good salaries and benefits paid for the right people.
Room for rapid advancement in a young and energetic company.

 
 

Product Spotlight

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window