where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

MASHPROJECT LLC
Experts in hardness testing

189 views
Job Seeks
khalid
khalid
12:24 Mar-10-2010
Inspection Engineer

Job Location: Worldwide

I am a graduate Mechanical Engineer having 15 years experience in the field of In process Inspection of Pressure Vessels, Heat Exchangers, Piping, Storage tanks, Steel Structure & Condition monitoring of Rotary equipment etc. I have valid API-510 Certification, Level 2 in Radiographic testing, Level 1 in Ultrasonic Testing & CWB (Canadian Welding Bureu) Welding Inspector Because of this experience, I can make a direct and immediate contribution to your department.
My resume is attached ,which details my qualifications and suggests how I might be of service to you.
I would appreciate an opportunity to discuss the position with you further.
I am available for immediate appointment and can travel extensively or
relocate as required.
You may call me at +92300-2336129, where messages may be left if I am personally unavailable.

Thank you, and I look forward to hearing from you soon.


Sincerely yours





___________
Jawed Ahsan
C-18, Block-1, Street 3, Chaple Sun City
Gulzar-e-Hijri, Karachi, Pakistan
Cell #0092300-2336129

    
 
 

Product Spotlight

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

Navic - Steerable Modular Automated Scanner

The Navic is a modular, motorized, steerable scanner designed to carry multiple attachments used
...
in various scanning and inspection applications. The Navic is capable of weld scanning (girth welds and long seam welds), automated corrosion mapping, and tank scanning.
>

FlexoFORM™

The FlexoFORM™ solution integrates flexible phased array probe technology in a scanner to solv
...
e the challenges that come with inspecting pipe elbows. When combined with a water column, this solution can be used to collect easy-to-interpret data on elbows with diameters ranging from 4.5 in. OD up to flat and offers many benefits.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window