where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Teletest
Teletest Focus+ was the first system to use long-range guided wave ultrasonic testing to detect corrosion in pipelines.
640 views
Technical Discussions
Bangash
Engineering,
Saudi Arabia, Joined Feb 2009, 134

Bangash

Engineering,
Saudi Arabia,
Joined Feb 2009
134
10:14 Mar-16-2010
2D array probes

Dear Forum members
Can anyone help me in distinguishing function of linear and 2D array phased array probes and the equipment requirements for them. Can both types of probes be used in OMNISCAN MX .

 
 Reply 
 
Michael Moles †2014 *1948
, Joined ,
13:59 Mar-18-2010
Re: 2D array probes
In Reply to Bangash at 10:14 Mar-16-2010 (Opening).

Bangash:

Try looking at our Advanced Applications book "Advances in Phased Array Ultrasonic Technology Applications", Olympus NDT –published Q1, 2007. You can find it on our web site, www.olympus-ims.com. It has several examples of 2D array inspection using OmniScan.

Some basic 2D arrays can be controlled by the OmniScan but the most suitable equipment for this is the Focus LT controlled with the TomoView software.

Michael

 
 Reply 
 

Product Spotlight

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window