where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

KARL DEUTSCH
INSTRUMENTS AND SYSTEMS FOR NON-DESTRUCTIVE TESTING OF MATERIALS.

862 views
Technical Discussions
danny celebrado
danny celebrado
02:20 Sep-03-2001
Hi temp couplant for UT

Any known Hi temperature couplant for UT application say for Hi-pressure steam line ( 250 C and above). thanks


    
 
 
David Smith
David Smith
00:36 Sep-03-2001
Re: Hi temp couplant for UT
: Any known Hi temperature couplant for UT application say for Hi-pressure steam line ( 250 C and above). thanks
.Phoenix supply a high temperature grease for use up to 300 degsC, we also supply high temperature probes and scanners. If you would like additional information please contact me.



    
 
 
John Rutter
John Rutter
07:57 Sep-03-2001
Re: Hi temp couplant for UT - Yes!
: Any known Hi temperature couplant for UT application say for Hi-pressure steam line ( 250 C and above). thanks
.
Sonotech manufactures and distributes high temperature couplants for this very purpose. You can find them under the Industrial Products section of the web site.

John Rutter
Sonotech, Inc.



    
 
 
Art Leach
Sales
GE Inspection Technologies, USA, Joined Apr 2001, 12

Art Leach

Sales
GE Inspection Technologies,
USA,
Joined Apr 2001
12
02:19 Sep-04-2001
Re: Hi temp couplant for UT
: Any known Hi temperature couplant for UT application say for Hi-pressure steam line ( 250 C and above). thanks
.

Krautkramer offers two different types of hi-temp couplant.

Hi-tempco is a thick couplant capable of being used at surface temperatures of up to 550 deg. F/ 288 deg. C. The couplant is packaged in a 2 oz. tube and is sold individually or in a package or 12.

ZEM is a hi temp couplant that works above 400 Deg. F / 200 deg. C up to 1,000 deg. F / 540 deg. C. The couplant is packaged in a 4 oz. tube.




    
 
 

Product Spotlight

TVC awarded UKAS accreditation

TVC are delighted to finally announce we have been awarded UKAS accreditation for our calibration
...
laboratory. Laboratory accreditation to ISO/IEC 17025:2005 enables us to conduct the Electrical Verification of Ultrasonic Flaw Detection Equipment to BS EN 12668-1:2010. It has taken many months of hard work and we want to thank our staff for all their efforts during this massive undertaking.
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window