where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

GE Inspection Technologies GmbH
offers equipment, systems and expertise based on ultrasonics, radiography, eddy curreent and remote visual inspection.

755 views
Technical Discussions
Stepanov
Engineering, Researcher, Ph.D
Kurchatov Istitute, Russia, Joined Oct 2001, 3

Stepanov

Engineering, Researcher, Ph.D
Kurchatov Istitute,
Russia,
Joined Oct 2001
3
04:03 Oct-01-2001
content of British Journal of NDT in WEB

Does anyone know where can I find in WEB information on current content of British Journal of NDT ?
Thanks in advance


    
 
 
Rolf Diederichs
Director,
NDT.net, Germany, Joined Nov 1998, 604

Rolf Diederichs

Director,
NDT.net,
Germany,
Joined Nov 1998
604
02:51 Oct-01-2001
Re: content of British Journal of NDT in WEB
On NDT.net we publish frequently table of contents
of Insight issues, see www.ndt.net/publicat/bibliog/insi2001.htm

Rolf Diederichs
----------
: Does anyone know where can I find in WEB information on current content of British Journal of NDT ?
: Thanks in advance
.



    
 
 
Nigel Armstrong
Engineering, - Specialist services
United Kingdom, Joined Oct 2000, 1096

Nigel Armstrong

Engineering, - Specialist services
United Kingdom,
Joined Oct 2000
1096
02:43 Oct-03-2001
Re: content of British Journal of NDT in WEB
Hello Stepanov,

Have you been to BINDT's web-site (www.bindt.org)? You'll find a list of the contents of all Insight issues (Services/Insight Journal/Features 2001).

Best regards

Nigel


    
 
 

Product Spotlight

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

AMIGO2

TSC Amigo2 - ACFM technology has developed a solid reputation for accurately detecting and sizing
...
surface-breaking cracks through paint and coatings. As the industry demands increased performance in speed, signal quality, and portability, it’s time for an evolution. It’s time for Amigo2.
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window